SOLIDWORKS Simulation 2021 Default Mesh Settings

Javelin Tech Tips

SOLIDWORKS Simulation 2021 increases your control over the default mesh settings for new Simulation studies. Accessed in the menu through Simulation > Options , the default settings provide numerous options to configure studies before they are created.

SOLIDWORKS Simulation 2021 Mesh Quality Diagnostics Tool

Javelin Tech Tips

SOLIDWORKS Simulation 2021 has added an important tool to help diagnose and efficiently improve mesh quality — the Mesh Quality Diagnostics Tool. The post SOLIDWORKS Simulation 2021 Mesh Quality Diagnostics Tool appeared first on The Javelin Blog.

SOLIDWORKS Simulation 2021 Terminology Changes

Javelin Tech Tips

There are some amazing enhancements coming with SOLIDWORKS Simulation 2021. Although SOLIDWORKS Simulation 2021 Terminology may not be a significant enhancement, it will be noticed immediately. SOLIDWORKS Simulation Component Contact.

SOLIDWORKS Simulation 2021 Enhanced Blended Curvature-Based Mesher

Javelin Tech Tips

SOLIDWORKS Simulation provides three different types of meshers. The Blended Curvature-Based mesher was introduced in Simulation 2016 with improved algorithms that can assist where the other two meshers may fail. This took about 37s to mesh with Blended in Simulation 2020.

SOLIDWORKS Simulation 2021 Geometry Corrections for Curved Surfaces in Contact

Javelin Tech Tips

SOLIDWORKS Simulation 2021 has improved the calculations for curved surfaces that come into contact by integrating geometry correction factors. The results from SOLIDWORKS Simulation 2020 and 2021 are shown below. SOLIDWORKS 2020 displacement plot.

SOLIDWORKS Simulation 2021 Improved Bonded Formulation

Javelin Tech Tips

SOLIDWORKS Simulation 2021 has made changes to algorithms related to bonded interactions to improve the accuracy and stability of static, frequency and buckling studies. SOLIDWORKS Simulation Study with Bonded Components. SOLIDWORKS Simulation Mesh Gaps.

SOLIDWORKS Mass Overrides with Simulation

Javelin Tech Tips

Within SOLIDWORKS, a mass override can be defined to explicitly give a component a custom mass. SOLIDWORKS Mass Override. However when creating a Simulation study, it is very important to realize that these mass overrides are NOT applied to the study.

SOLIDWORKS Simulation 2021 Interaction Improvements and Stabilization

Javelin Tech Tips

Simulation studies require proper geometry setup to ensure that the solver can run. SOLIDWORKS Simulation 2021 adds significant functionality to assist in stabilizing the model from the beginning. SOLIDWORKS Simulation 2021 Default Interaction Options.

How to let SOLIDWORKS Simulation find the best design for you

Javelin Tech Tips

SOLIDWORKS Simulation offers many advantages to automate, and even find on its own, the best design for you! Whether it’s with Design Studies, Design Optimization, or Topology Studies, SOLIDWORKS Simulation will help you choose the best design, faster than ever!

Heat Flux Singularities in SOLIDWORKS Simulation

Javelin Tech Tips

The same concept of singularity applies to the thermal simulations. A thermal simulation has been run and the distribution of heat flux is plotted. The post Heat Flux Singularities in SOLIDWORKS Simulation appeared first on The Javelin Blog.

SOLIDWORKS Simulation Bearing Load

Javelin Tech Tips

Applying a force to a hole in Simulation will give a uniform load to all locations on the hole. The SOLIDWORKS Help section on Bearing Loads provides a good illustration of how this applies. SOLIDWORKS Simulation Help – Bearing Loads. The difference between Sinusoidal and Parabolic distributions is explained in the Bearing Load Distribution section of SOLIDWORKS Help. The post SOLIDWORKS Simulation Bearing Load appeared first on The Javelin Blog.

SOLIDWORKS Simulation Accuracy Report by AFNOR

The Solidworks Blog

Need to know how accurate SOLIDWORKS Simulation really is? This report compares 101 results given by SOLIDWORKS Simulation 2019 with examples provided by AFNOR. To get the full validation report of SOLIDWORKS Simulation 2019 by AFNOR, click here. Engineering Simulation is a multi-billion dollar business and for good reason. To find out how SOLIDWORKS Simulation can make a difference in your business, contact your Value-Added Reseller today.

Simulating Hydrostatic Pressure in SOLIDWORKS Simulation

Javelin Tech Tips

SOLIDWORKS Simulation lets you create studies that review the effects of hydrostatic pressure of a fluid in a model. A static simulation study is created and the bucket is fully constrained at the bottom of the bucket. The post Simulating Hydrostatic Pressure in SOLIDWORKS Simulation appeared first on The Javelin Blog. SOLIDWORKS Simulation Hydrostatic Pressure Static Study

Explore Simulation-Driven Design

The Solidworks Blog

With 3D EXPERIENCE WORKS you can design, simulate, adjust, and validate all on one platform. Industry Process Consultants Gian Calise and Michael Steeves will showcase design and simulation workflows working in tandem. Author information SOLIDWORKS Dassault Systèmes SolidWorks Corp.

New Seamless SOLIDWORKS Workflow with Proven Advanced Simulation (Abaqus) and Faster Collaboration

The Solidworks Blog

For some mechanical engineers, performing real simulation techniques for simulating structure behavior, such as finite element analysis (FEA), is also an art. Simulation for All. Scalable structural simulation solutions (with Abaqus technology) made for all user profiles.

SOLIDWORKS Simulation 2021: Enhanced Contact for Faster, More Stable and Accurate Results

The Solidworks Blog

SOLIDWORKS® Simulation 2021 is the biggest release we have seen in many years! We remain focused on making Simulation easier and faster for SOLIDWORKS users to apply to their designs. Better Performance: Faster Contact Simulation.

SOLIDWORKS Simulation Reports

Javelin Tech Tips

SOLIDWORKS Simulation provides an automatic way to export your results to a Word document. SOLIDWORKS Simulation Report Tools. SOLIDWORKS Simulation Include Image in Report. To customize the default sections to publish and any common information to include, this can be done beforehand under Simulation > Simulation Options > Default Options > Reports. SOLIDWORKS Simulation Report Default Options.

How to use Thermal Radiation in SOLIDWORKS Simulation

Javelin Tech Tips

In SOLIDWORKS Simulation, radiation is defined by an emissivity of the surface and the ambient temperature of the surrounding environment. A new simulation study is created and “thermal” simulation is selected from the type of analysis.

Advancing SOLIDWORKS Simulation Capabilities Using SIMULIAworks

The Solidworks Blog

These are exciting times on the simulation front at Dassault Systèmes (DS). Working at SOLIDWORKS for the last 10 years, we’ve been validating designs with SOLIDWORKS Simulation, which comes in three different packages: Standard, Professional, and Premium. These packages offer a ton of value to our user community, are easy to use and seamlessly integrated with SOLIDWORKS. With the combined power of all its divisions, DS offers so much more than just SOLIDWORKS.

Improving Productivity with Simulation

The Solidworks Blog

Last week, we wrapped up the simulation webinar series. Here is a quick recap of the webinar: We started the discussion around some SOLIDWORKS Evaluation tools such as Interference Detection, Clearance Detection and Print 3D that help fine tune designs before Additively Manufacturing them.

SOLIDWORKS Simulation 2020 Collapse Tree Folders

Javelin Tech Tips

SOLIDWORKS Simulation study trees can become long and harder to navigate when you start into more complex studies. SOLIDWORKS Simulation Study Tree Expanded. New in SOLIDWORKS Simulation 2020 is the ability to right-click on or beside a folder or sub-folder (i.e. Parts) and select ‘Collapse Tree Items’ SOLIDWORKS Simulation 2020 Collapse Tree Items. SOLIDWORKS Simulation Study Tree Collapsed.

Thermal Stress Analysis with SOLIDWORKS Simulation

Modern Tech

SOLIDWORKS Simulation enables you to test multiple conditions from static and dynamic response to heat transfer. SOLIDWORKS Simulation 3D CADWhen you are designing a product, it is important to accurately analyze the varied temperatures to ensure the stability of your model. Thermal stress analysis refers to a static analysis that measures the strains, stresses and deformations that occur with changes in temperature.

New SOLIDWORKS Simulation Expert Exam Now Available

The Solidworks Blog

A new SOLIDWORKS Simulation Expert exam is now available! This is the second expert-level exam from the SOLIDWORKS Brand. This exam was developed for seasoned analysis users who have a good understanding of the entire suite of analysis tools available in SOLIDWORKS Simulation Premium. 30 multiple choice questions to test your expert knowledge of the theory, software capabilities, and your familiarity with the SOLIDWORKS Simulation interface.

Guided Simulation with Structural Performance Engineer

The Solidworks Blog

For new users, setting up simulations can require a bit of a learning curve. For more experienced users, knowing when all required steps have been successfully completed can help ensure a simulation is ready to be solved, thereby increasing efficiency.

Which SOLIDWORKS Simulation Package is best for me?

Javelin Tech Tips

Similar to SOLIDWORKS 3D CAD, SOLIDWORKS Simulation is offered in Standard , Professional , and Premium packages, giving you a choice of analysis modules, allowing you to get the best value for your software investment. “Which Simulation Package is best for me?” The following diagram shows which modules are available with the three packages: SOLIDWORKS Simulation is offered in Standard, Professional, and Premium packages. SOLIDWORKS.

SOLIDWORKS Simulation 2020 Network License Selection

Javelin Tech Tips

SOLIDWORKS Simulation is available with various levels of licensing , providing access to specific study types: SOLIDWORKS Premium license gives you access to Linear Static and Motion studies. SOLIDWORKS Simulation Standard license includes Linear Static, Motion and Fatigue. SOLIDWORKS Simulation Professional license includes everything in Simulation Standard and adds Thermal, Buckling, Frequency, Pressure Vessel, Drop Test and Optimization.

SOLIDWORKS Simulation 2017 Display Simulation Results in the Graphics Area

Javelin Tech Tips

SOLIDWORKS Simulation 2017 now gives you the ability to display the results of a Simulation plot in the SOLIDWORKS graphics area. This is useful for demonstration purposes if the Simulation study has been simplified by excluding components. Viewing plots in the Simulation study itself will only show components being analyzed. Simulation Results Displayed. To display SOLIDWORKS Simulation Results. SOLIDWORKS Display Option.

Dassault Systèmes Introduces SOLIDWORKS 2020 Release at Modeling & Simulation Conference

3DPrint.com

At SOLIDWORKS 2019 in Dallas, Dassault Systèmes revealed a lot of features the company was working on for its upcoming SOLIDWORKS 2020 release. 3D Printing 3D Printing Events 3D Software.3mf 3d simulation 3d slicing 3dexperience 3DEXPERIENCE 3D Software Platform 3DExperience platform 3DEXPERIENCE.WORKS 3mf file format Dassault Systèmes Enovia geometry new software release SIMULIA solidworks SOLIDWORKS 2020 SOLIDWORKS 3DEXPERIENCE PLM Services SOLIDWORKS PDM

SOLIDWORKS Simulation Bowling

CADD Edge

I’ll be honest, the primary motivator for this simulation was to figure out why I’m so terrible at bowling. So, I decided to simulate different hits to figure out what was happening. This is where motion simulation is helpful. One of the more interesting findings with the simulation is that pins rarely tumble unless you have spin. Let's Start SOLIDWORKS Simulation Bowling. Bowling Simulation Results. SOLIDWORKS Simulation

What’s New in SOLIDWORKS Simulation 2020

The Solidworks Blog

SOLIDWORKS® Simulation 2020 is all about ease of use and performance! SOLIDWORKS Simulation 2020 took a big leap forward by changing the Bonded Contact setup default from Compatible mesh to Incompatible mesh. The SOLIDWORKS Simulation team worked hard to make our Incompatible mesh almost as accurate as Compatible mesh. This is a fantastic way to accelerate simulation calculation to bring your products to market faster and be more competitive.

SOLIDWORKS Frisbee Flow Simulation

CADD Edge

After my previous summer games blog, I decided to try it in flow simulation. Not only would it satisfy the mystery of how Frisbees fly without wings, it would also be a great chance to try the new option in Flow Simulation for rotating bodies. Thanks to SolidWorks Flow Simulation , and rotating walls, we can easily see this phenomena. For more information on Simulation and other SOLIDWORKS products check out our recorded webinars. SOLIDWORKS Simulation

Get Hands-on with Advanced Simulation at SOLIDWORKS World 2019

The Solidworks Blog

This year at SOLIDWORKS WORLD 2019, if you’re a Simulation aficionado, you’re going to be spoiled! We’re excitedly looking forward to announcing the commercial availability of our latest simulation solution, SIMULIA Structural Simulation Engineer (SSE). Extend SOLIDWORKS Simulation with a tightly integrated, cloud-based solution and solve complex physics with confidence. Solving Complex Structural Simulation Problems with SOLIDWORKS and SIMULIA.

How Accurate Is a Digital Simulation When Compared to Physical Reality?

The Solidworks Blog

Software companies like to trumpet the idea that a computer simulation is a close approximation of how your product design will behave when exposed to actual physical forces, such as pressure, temperature, airflow, vibration, and more. appeared first on The SOLIDWORKS Blog.

Mesh Away With SOLIDWORKS Simulation Adaptive Meshing

Javelin Tech Tips

When working with SOLIDWORKS Simulation software it’s important to understand the accuracy of the results! Well there is a tool called SOLIDWORKS Simulation Adaptive Meshing. SOLIDWORKS Simulation Mesh. Where to find SOLIDWORKS Simulation Adaptive Meshing. Adaptive meshing is conveniently located under properties: SOLIDWORKS Simulation Adaptive Meshing. For more information about SOLIDWORKS Simulation contact us!

Simulate Efficiently with the SOLIDWORKS Simulation Load Case Manager

Javelin Tech Tips

Getting valid, informative, and useful results is the goal of any design validation and verification activity, whether it be through simulation or physical testing. SOLIDWORKS Simulation’s innovative tools allow you to begin testing your designs at any stage of the design process, enabling you to identify concerns early, before they can cause delays. Contact us today, or continue reading our blog to learn about using SOLIDWORKS Simulation to decrease your time to market.

Using Symmetry in your SOLIDWORKS Flow Simulation Studies

Javelin Tech Tips

The size of your SOLIDWORKS Flow Simulation studies can be drastically reduced by using symmetry to simplify the study. SOLIDWORKS Flow Simulation creates mirrored results for symmetric studies. In order to use the symmetry in flow simulation, both the geometry and the boundary conditions should be symmetric. To apply symmetry boundary condition in SOLIDWORKS Flow Simulation, the model does not need to cut or split.

SOLIDWORKS Simulation 2019 Topology Study Intermediate Results

Javelin Tech Tips

SOLIDWORKS Simulation 2019 now allows Topology Studies to be stopped during intermediate iterations and keep its results. SOLIDWORKS Simulation 2019 Topology Solver Dialog. SOLIDWORKS Simulation 2019 Topology Study. SOLIDWORKS Simulation 2019 Intermediate Topology Results. SOLIDWORKS Simulation 2019 Topology Intermediate Result Warning. SOLIDWORKS Simulation 2019 Topology Intermediate Result Plots.

Study 46

SOLIDWORKS Simulation 2018 Dismiss Message

Javelin Tech Tips

New in SOLIDWORKS Simulation 2018 is the ability to dismiss pop-up messages. If you have incorrectly set a SOLIDWORKS Simulation Dismiss Message, it can be re-enabled through the Simulation system options ( Simulation > Options > System Options tab). The post SOLIDWORKS Simulation 2018 Dismiss Message appeared first on SOLIDWORKS Tech Tips, Videos & Tutorials from Javelin.

SOLIDWORKS Simulation Cleaning Utility

Javelin Tech Tips

One of the lesser known tools that gets installed along with SOLIDWORKS software is the SOLIDWORKS Simulation Cleaning Utility. This utility tool can be used to permanently delete any simulation data, including simulation setup and results information, from any SOLIDWORKS part or assembly file. For example, imagine that you want to share the files with someone else who does not need the simulation data. SOLIDWORKS Simulation Cleaning Utility.

SOLIDWORKS Flow Simulation 2018 adds Noise Prediction

Javelin Tech Tips

Noise prediction capability is available in SOLIDWORKS Flow Simulation 2018. in SOLIDWORKS Flow Simulation based on the calibration of Sarkar and Hussaini. SOLIDWORKS Flow Simulation can also report the acoustic power in dB, which is computed from equation (4): Equation (4). Note: the noise prediction added to Flow Simulation package as of 2017 SP.3 The ‘Acoustic Power’ option activates the calculation of a noise level prediction.

Save Time with SOLIDWORKS Simulation 2019

Javelin Tech Tips

SOLIDWORKS Simulation 2019 can’t create more time (I wish), but it will save you a ton of time on repetitive tasks and simulations! SOLIDWORKS Simulation 2019 is a powerful computational analysis tool capable of optimizing the design of products used in extreme and rugged environments. This process supports a wide range of features, including SOLIDWORKS Simulation 2018 time-saving enhancements to pin connectors.

SOLIDWORKS Simulation Copy Features to New Studies

Javelin Tech Tips

Running multiple SOLIDWORKS Simulation studies on a model typically have similar features. SOLIDWORKS Simulation Copy Study. You have the ability to drag features from an existing study on top of another Simulation study tab. SOLIDWORKS Simulation Copy Force Load. SOLIDWORKS Simulation Copy Connectors. SOLIDWORKS Simulation Copy Mesh. SOLIDWORKS Simulation Copy Parts Folder.

Study 40

Increase Your SOLIDWORKS Simulation Linear Static Productivity in Six Minutes

Javelin Tech Tips

If SOLIDWORKS Linear Static Analysis is top of mind when you hear simulation, this video is for you. 2D Simplification to solve simulations faster without sacrificing mesh density. WATCH THE VIDEO to learn how you can maximize your productivity and become a better Simulation user by upgrading to SOLIDWORKS Simulation Professional : The post Increase Your SOLIDWORKS Simulation Linear Static Productivity in Six Minutes appeared first on The Javelin Blog.