Thor Open Source Robotic Arm from Spain

DIY 3D Printing

Thor is an Open Source and 3D printable robotic arm with six degrees of freedom developed by Ángel Larrañaga Muro from Madrid, Spain. 3d printed robot open source Spain

Spain 208

Lewihe 3d printer from Spain is optimized for flexible filaments

DIY 3D Printing

Lewihe is new 3d printer from Spain which focuses on fast printing with flexible filaments like FilaFlex. Lewihe 3d printer tech specs: Print area 185 x 185 x 185 mm (7.28 x 7.28 x 7.28 in), Lewihe ProXL model 350x250x185 mm (12.6 x 9.84 x 7,28 in) 50 microns layer resolution 1.75

Spain 172

Trending Sources

Lewihe Play 69 Euro 3d printer kit from Spain

DIY 3D Printing

europe low cost new diy 3d printer SpainThis must be the cheapest 3d printer in the world! 69 euro! BUT WAIT! It comes without some essential parts like motors, hot end, electronics. What is the point of this concept? I'm not sure.

Spain 172

Stalactite 102 HD DLP foldable 3d printer from Spain

DIY 3D Printing

New high definition DLP 3d printes comes from Barcelona, Spain. dlp europe foldable new diy 3d printer resin Spain It also features different resin types like wax resin suitable for lost casting.

Spain 159

Tour: MADE Makerspace in Barcelona, Spain

Fabbaloo

MADE Makerspace in Barcelona [Source: SolidSmack]. This tour of. Read the whole entry. » » tour

Spain 52

Tour: MADE Makerspace in Barcelona, Spain

Fabbaloo

MADE Makerspace in Barcelona [Source: SolidSmack]. This tour of. Read the whole entry. » » tour

Spain 52

3D Printer Party Held in Spain Breaks Records and Brings the Fun

3DPrint.com

Burgos, the capital of the state of Castile, is a historic city of about 200,000 in the northern part of Spain, home to a Cathedral that has been declared a UNESCO World Heritage Site as well as to a. View the entire article via our website.

Spain 64

Spain’s MyMat Solutions Releases Nylon 3D Printing Filaments, Offering Superior Mechanical Strength

3DPrint.com

MyMat Solutions, based in Spain, has two new products and they want to share them with the world. 3D Printing 3D Printing Materials 3d printing filament 3d printing materials 3D printing nylon filament 3D printing ultra nylon filament MyMats Solutions soft nylon filament spain ultra nylon filament

Spain 87

ACCIONA and the National Archaeological Museum of Spain highlight history with 3D printed arch

3D Printing Industry

The garden of Spain’s National Archaeological Museum (MAN) in Madrid is now home to a 2.2 m tall archway. A replica of the San Pedro de las Dueñas Arch, already a part of the museum’s collection, this monument was made to help to demonstrate the potential of emerging technologies and their role in historic preservation. The […]. Art & Sculpture ACCIONA Andrés Carretero d-shape Enrico Dini Juan Ignacio Entrecanales MAN National Archaeological Museum

Spain 63

3D Printing From Spain's Dynamical Tools

Fabbaloo

Spain’s Dynamical Tools markets a series of. Dynamical Tools' DT600 industrial 3D printer. Read the whole entry. » » printer

Spain 52

Torrequebradilla, Spain. Population: 300 People and 300 3D Printed Clones

3D Printing Industry

… The original post Torrequebradilla, Spain. By Davide Sher.

Spain 114

Renishaw opens two new AM Solutions Centres in Spain and Italy

3D Printing Industry

UK-based additive manufacturing specialist Renishaw has opened two new additive manufacturing Solutions Centres, one in Barcelona, Spain, and the other in Torino, Italy. The centres will give local companies access to Renishaw’s equipment and expertise, aiming to create a secure development environment for businesses. The Solutions Centres will give customers access to systems including Renishaw’s […]. Business Additive manufacturing Marc Saunders OSP60 Renishaw Solutions Centre

Spain 57

Spain Shows Support for HP’s 3D Printing Development Endeavors with €21.25 Million Fund

3DPrint.com

investment Multi Jet Fusion 3D printing technology spain sprout The 3D printing world is rich with substantial announcements lately, and HP has certainly been stealing the lion’s share of headlines. In setting up the framework for shaking up the 3D printing world over the... View the entire article via our website. 3D Printing Business 3d printing investments grant Hewlett Packard Enterprises hp hp inc.

Spain 87

3d printing and coffee at FabCafe Barcelona

DIY 3D Printing

europe fablab Spain tv https://www.facebook.com/FabCafeBCN.

Spain 166

We Attended ADDIT3D, the First Additive Manufacturing Trade Show in Spain

Materialise

The very first edition of ADDIT3D was held this year in Bilbao, Spain, from the 30 th of May to the 4 th of June. The Materialise booth Various of our 3D-printed display items Presentation by Materialise Spain Manufacturing Account Manager Martin Saez.

Spain 62

Spain’s Ibarmia Mixes Perfect Combination of New & Traditional Technology to Make ADD + PROCESS 3D Printer

3DPrint.com

The name Ibarmia, in Spain and in the industrial world, is synonymous with machines. 3D Printers 3D Printing ADD + PROCESS 3D printer Ibarmia industrial 3d printing spain TecnaliaFounded over 60 years ago, this family-owned machine tool company offers innovative and customized products to. View the entire article via our website.

Spain 58

Biomedical Research Team in Spain Working on 3D Printed Corneas to Make Up for Lack of Donors

3DPrint.com

3D Printing 3D Printing Materials Medical 3D Printing 3d print transplants 3d printed cornea bioengineering biomedical 3D printing harvard Idea2 Global program IDIPAZ La Paz Hospital Massachusetts Institute of Technology mit nanotechnology organ donors scaffolding spain stem cell research stem cells tissue engineering

Spain 63

3D Printing in Spain: Will You Be Having the Steak or Chicken?

3DPrint.com

3D printing has made headlines around the world due to groundbreaking innovations in the medical field—even allowing for patients’ lives to be saved in some cases due to new implants or. View the entire article via our website. 3D printed chicken 3D Printed Food 3D Printers 3D Printing 3d printed food 3D printed steak Polytechnic University of Catalonia

Spain 74

Spain’s National Archaeological Museum and Acciona Presented The First Romanesque Arch Printed in 3D

3DPrint.com

Collections of objects are normally exhibited behind enclosed glass displays to prevent people from touching them. Considering these objects are fragile and have a great historical value, museums. View the entire article via our website. 3D Printed Architecture 3D Printed Art 3D Printing 3D Scanning 3d print culture 3D printed arch 3d printed artwork 3D printed historical replicas Acciona concrete cultural heritage d-shape National Archaeological Museum The Arch of San Pedro de las Dueñas

Spain 55

Spain’s BCN3D Unveils Not One but Two New 3D Printers: Sigma & Lux

3D Printing Industry

… The original post Spain’s BCN3D Unveils Not One but Two New 3D Printers: Sigma & Lux appeared first on 3D Printing Industry. By Tarun Tampi. What separates BCN3D Technologies as a 3D printing company is their long-standing commitment to educating everyone in 3D design, prototyping, and product development. It’s not just about building and selling high-quality open source 3D printers for them, it’s also about creating a grassroots ecosystem for Makers.

Spain 86

REGEMAT 3D Will Start Selling Biomaterials

3DPrint.com

One of the key players in the bioprinting field in Spain will be incorporating seven new biomaterials. 3D Printing Bioprinting Medical 3D Printing alginate biomaterials collagen gelMA nanocellulose 3d printing material REGEMAT 3D spain thermoplasticsIn the coming months, REGEMAT 3D will launch a catalog of biomaterials that customers. View the entire article via our website.

Spain 76

Shipyard 4.0 Concept Features 3D Printing, Digital Twins, Advanced Technologies for Shipbuilding in Spain and Australia

3DPrint.com

One of the many industries that is increasingly using 3D printing technology is shipbuilding: we’ve seen everything from a 3D printed class-approved propeller to a heightening focus on. View the entire article via our website. 3D Printing Robotics Virtual Reality artificial intelligence augmented reality Automation and Robotics autonomous vehicles cybersecurity digital twins Fourth Industrial Revolution Industry 4.0 Navantia shipbuilding ships Shipyard 4.0

Spain 57

Spain’s Turtle 3D Unveils Their Lora and Lora S 3D Printers

3DPrint.com

The torrid pace in which new 3D printers had been coming to market over the last year or so has somewhat died down as the consumer side of the market becomes a bit over... View the entire article via our website. 3D Printers 3D Printing bowden extruder direct extruder Lora Lora s small 3d printer Turtle 3d

Spain 87

7,000 3D Printed Words Printed in Spain

Fabbaloo

An unusual art installation at the Colombian Embassy in Madrid is 3D printing 7,000 words. The project is a joint venture of Telefónica and the Colombian Embassy. The words being 3D printed are snippets from Colombian writer Gabriel García Márquez, and were to be completed in only 20 days.

Spain 52

Interview with Aintzane Arbide of IAM 3D Hub Barcelona

3DPrint.com

3D Printing Exclusive Interviews 3d print spain 3d printing barcelona 3d printing hub 3d printing hubs barcelona catalunya digital innovation hub european comission feria hewlett packard IAM 3D Hub Renishaw spainWe’re very interested in seeing if hubs can bring about the future of 3D printing in a communal way. We’re far from alone in that front however cities such as Singapore and Dubai are. View the entire article via our website.

Barcelona Campus: HP Inc. Opens 3D Printing and Digital Manufacturing Center of Excellence

3DPrint.com

industrial 3d printing spainAnyone out there who still thinks 3D printing is a flash in the pan might want to take a closer look at where numerous industry giants are putting the big. View the entire article via our website. 3D Printing 3D Printing and Digital Manufacturing Center of Excellence in Barcelona hp HP 3DP hp inc.

Spain 79

Behind the 3D printed bridge: exclusive interview with Catalonian designers at IAAC

3D Printing Industry

A collaboration between the Institute for Advanced Architecture of Catalonia (IAAC) in Barcelona, Spain, and ACCIONA, a company dedicated to Spain’s sustainable infrastructure, have pipped. Design 3d printed bridge 3d printed concrete ACCIONA Alcobendas Alex Dubor architecture Areti Markopoulou Barcelona bridge Catalonia concrete construction Enrico Dini IAAC Institute for Advanced Architecture of Catalonia Rodrigo Aguirre Spain

Partners of Spanish Hospital Use Stratasys FDM Technology to 3D Print Medical Models

3DPrint.com

Founded in 2008, Biodonostia Health Research Institute was the very first medical research institute in Spain’s Basque region, and now focuses on research in seven subject areas, from oncology. 3D Printing Medical 3D Printing 3d printed medical model 3d printed models of tumors 3d printed tumor Biodonostia Fortus 450mc patient specific spain stratasys Stratasys FDM 3D printing stratasys fortus 450mc tumor

Spanish Company BRECA Health Care is at the Forefront of Medical Devices & Bioprinting

3DPrint.com

In 2018 Spain’s health care system ranked third in the world, behind Hong Kong and Singapore, and first in Europe according to a Bloomberg study, so it’s no wonder that research and development of. 3D Printing Bioprinting Medical 3D Printing 3D bioprinters 3d bioprinting 3D printing in healthcare BRECA Health Care cartilage healthcare 3d printing applications jose baena PITI3D REGEMAT 3D spain University of Granada

Repsol Acquires 17 Percent of Spanish 3D Printing Filament Supplier Recreus

3DPrint.com

3D Printing 3D Printing Materials Business 3D industry acquisitions 3D printing filaments 3D printing polymers recreus Repsol spainAs it turns out, Recreus and Repsol have a lot in common. And now they will be able to develop their shared interests in propelling industries like medicine further into the future with new. View the entire article via our website.

DIY contact 3D scanner with Arduino and FreeCAD

DIY 3D Printing

This device was developed by Javier Martinez Garcia from Spain. 3d scanner arduino cad diy low cost python SpainHere is a nice little 3d scanner made from various scrap parts and Arduino. It is a simple contact 3d scanner that produces a pint cloud in FreeCAD.

3D Drucker… Imprimante 3D…Impresión 3D — ‘3D Printing’ Around the Globe

3DPrint.com

3D Printing Editorials / Opinions 3d druck 3d drucker 3d print france 3d print germany 3d print spain 3D printing global market europe france germanyf Impresión 3d Imprimante 3D spainWhile we are an English speaking media source, we cover numerous stories each day from around the globe, many in places where the primary language is not English. The 3D printing phenomenon certainly isn’t... View the entire article via our website.

Spain 85

WASP Opens Their First Spanish 3D Printing Hub This Weekend at Madrid Mini Maker Faire

3DPrint.com

This weekend, the Madrid Mini Maker Faire will draw a mix of makers, instructors, businesses and curious onlookers to Spain’s capital city for workshops, exhibitions, presentations and more, View the entire article via our website. 3D Printing Business Gianluca Pugliese madrid Madrid Mini Maker Faire spain wasp WASP Madrid Hub

Using DC motors to replace steppers on x and y axis

DIY 3D Printing

It was developed by misan from Spain and he used it successfully on x and y axis of his Prusa I3. arduino closed loop dc motor europe hack i3 low cost prusa servo software Spain stepper Here is a new project of running a 3d printer with cheap DC servo motors.

DC 221

The Manacor Museum Uses 3D Printed Replicas to Encourage Visitors to Touch Its Exhibits

3DPrint.com

The Manacor Museum in Mallorca, Spain was founded in 1908 as an archeological museum, but has since evolved into a true historical museum, showcasing objects from across the historical spectrum. 3D Design 3D Printed Art 3D Printing 3D Scanning 3d Photogrammetry 3D printed replicas 3d printing in museums curatorial practice hands on exhibits mallorca manacor museum museum photogrammetry replica spain

Spain 62

Dimafix adhesive spray for heated beds

DIY 3D Printing

3d printing abs juice europe glue heated build platform print bed problemsolving Spain surface Dimafix is a new adhesive spray solution to improve bounding of printed objects to print surface and avoid warping.

Spain 190

3d printers at Medialab Prado Madrid

DIY 3D Printing

europe fablab madrid media Spain Good friends of mine went to Madrid and visited local hacklab / medialab the MediaLab Prado. Since they know I''m into 3d printing they sent me some photos of machines they use there (thnx Valent and Milijana).