St. Louis Researchers Ask for Stratasys Direct Manufacturing’s Help in Creating Accurate 3D Printed Models for Surgicial Training

3D Printing 3D Printing Materials Medical 3D Printing 3d printed brain model 3d printed medical models 3D printed surgical simulation models aneurysm brain aneurysm Dr. Saleem Abdulrauf polyjet 3d printer St. Louis University Department of Neurological Surgery St. Louis University Hospital stratasys Stratasys 3D Printing Case Studies Stratasys Direct Manufacturing Walter E.

Stratasys 3D Printing Roadshow Hits St Louis


However, those in the St Louis area will have the opportunity to learn how 3D printing is helping to make better products faster while reducing costs. Additive manufacturing leader Stratasys is inviting the St. Louis Frontenac.

Trending Sources

Stratasys Additive Manufacturing Roadshow St. Louis, MO

CATI Tech Notes

CATI and Stratasys are co-hosting a 3D Printing and Additive Manufacturing road-show event in St. Louis, MO on March 10 th from 9am-12pm. Event Details: Date and Time: March 10, 2015 9am – 12pm Lunch is served at 12pm Location: Hilton St. Louis Frontenac 1335 South Lindbergh Boulevard St. Louis, MO 63131 >>Registration Link We hope to see you there. .

Exclusive – Stratasys Direct Manufacturing at the Forefront of Additive Manufacturing in Medicine

Additive Manufacturing

Stratasys Direct Manufacturing , based in Valencia, California, and a division of Stratasys , provided 3D printed brain, skull and aneurysm models to the St. Louis School of Engineering? Matthew Stenoien: For starters, we were able to supplement the St.

St. Louis 3D Printing and Additive Manufacturing Roadshow - Hosted by Stratasys

CATI Tech Notes

On December 9, 2014, the Stratasys 3D Printing and Additive Manufacturing Roadshow is traveling to St. Louis, MO. . Hilton St. Louis Frontenac 1335 South Lindbergh Boulevard St. Louis, MO 63131. >>>Registration

3D Systems & Cardiologists Help Toddler Breathe Easier Thanks to 3D Printed Heart Model

3D Printing Health 3D Printing 3d heart model 3d print heart models 3d printed heart 3d printed heart model 3d printed surgical models 3d printed surgical planning models 3d systems 3ds St. Louis Children''s Hospital Washington University School of Medicine The complexities and impacts 3D printing is making on the world are myriad.

2016 AMUG Conference will be at St. Louis Union Station

Leslie's Blog

The Additive Manufacturing Users Group (AMUG) announced that its 28 th annual users group conference will be located in St. Louis, Missouri, from April 3 – 7, 2016. The five-day event will be held at the St. AMUG selected St. AMUG will have “run of the house” at the St.

Fisher Unitech to Host 3D Printing Workshops Throughout the Midwest


3D Printing Chicago Events FDM Indianapolis Midwest News PolyJet St. Louis Stratasys TroyWant to come inside and cool off while learning about 3D printing? We will be hosting a series of professional 3D printing workshops throughout the Midwest this summer.

Computer Science Professor Develops FlowRep Algorithm for Creation of 3D Shapes

3D Design 3D Printing 3D Software 3D drawing Adobe Research algorithms Alla Sheffer FlowRep SIGGRAPH 2017 university of british columbia Washington University in St. LouisDescribing something to someone who has never experienced it before is difficult, maybe even impossible in some cases. How do you explain color to a blind person? Or how do you describe an unusual. View the entire article via our website.

LymphaTech 3D scanner can assess swollen limbs to avoid disability

3D Printing Industry

Budge Washington University School of Medicine in St. LouisPrevention, as they say, is cheaper and easier than the cure. As such, 3D printign and scanning technologies are finding increasing application in medicine around the world for point-of-care diagnosis of various infections and conditions such as the zika virus and degenerative eye disease. Using a 3D scanner developed by Atlanta startup LymphaTech, researchers in Sri […].

3D Systems Keeps Pace With High-Tech Cardiac Care With Patient-Specific 3D Models

3D Printing Business Health 3D Printing 3d printed anatomical models 3d printed heart models 3d printed hearts 3d printed surgical models 3d systems 3ds ANGIO Mentor™ VR endovascular simulator cardiology Dr. Shafkat Anwar patient-specific printing St. Louis Children's HospitalOn Monday, 3D Systems (3DS) announced the expansion of its product lines for Cardiology Training and Surgical Planning. The company, which is a major, global provider of 3D digital design and.

AMUG: XJet Presenting NanoParticle Jetting Metal 3D Printing Process to Large Crowd

The annual Additive Manufacturing Users Group Conference is in session this week through April 7th in St. Louis. Known more concisely as AMUG, this event has been promised to be bigger and better. View the entire article via our website. 3D Printers 3D Printing 3D Printing Materials Business 3d inkjet printing 3d metal printing AMUG israel metal 3d printing NanoParticle Jetting metal 3D printing RAPID 2016 Xjet

What Jimmy Kimmel Should Know about 3D Printing

Stratasys Blog for a 3D World

Dr. Pirooz Eghtesady, a pediatric cardiovascular surgeon at St. Louis Children’s hospital was recently featured as a medical expert on on conditions like the one experienced by Jimmy Kimmel and his family.

Surgical Simulation on 3D Printed Brains Improves Outcomes

Additive Manufacturing

The president of the neurological society, Dr. Saleem Abdulrauf, is a leading neurosurgeon who has served over 100 universities around the world and currently sits as the professor and chairman of the St. Louis University Hospital. Louis University School of Engineering.

3D printing shifts into manufacturing

Leslie's Blog

At the recent AMUG Conference in St. Louis, many conversations focused on taking 3D printing / additive manufacturing (3DP/AM) more into manufacturing rather than just prototyping.

Register for our 5th Annual Product Development Forum

CATI Tech Notes

Louis, MO. DoubleTree Hotel St. Louis at Westport. This May CATI will host our 5th Annual Product Development Forum. This unique event will show you how to take your product from concept to reality and improve your product development process with the help of solutions from CATI.

SOLIDWORKS 2015 Is Here - Attend Our Design Innovation Summit

CATI Tech Notes

Louis, MO. Louis Marriott West. Join CATI at our 4th annual Design Innovation Summit and be the first to see SOLIDWORKS 2015. The CATI Design Innovation Summit is an interactive learning experience focused on helping you design and make better products.

A Breakthrough in Better Anatomical Models


Dandy Neurosurgical Society, serving as Neurosurgeon-in-Chief at the St. Louis University Hospital. The St. Louis Department of Neurological Surgery partnered with the St. Together with the engineering and medical students at St.

DEF 2015 Recap II: Grand Rapids, Troy, Kansas City


Today we're kicking off things in St. Louis at the Union Station and will be traveling to Fitchburg, MA and Providence, RI soon after. We continue to be busy at Fisher Unitech with the second leg of Design Excellence Forum but it has definitely been a fun and insightful time.

RoboSpartans Think Outside the Bot with EKOCYCLE

3D Systems

Last week, a group of New York area robotics students, the RoboSpartans, competed against 72 of the East Coast’s best robotics teams to earn one of 24 invitations to the FIRST Tech Challenge World Championship in St. Louis slotted for later this month.

Hydrogels & 3D Printing Used to Produce Programmable Biocapsules

3D Printing Industry

A recent study, which was conducted by mechanical, aerospace engineering, electric engineering, and materials science experts from three US universities (Princeton, University of Minnesota, and Washington University in St. Louis) used bioprinting and hydrogels to develop programmable release capsules which could allow for “precise spatiotemporal control over chemical and bimolecular gradients of substances”.… By Davide Sher.

AMUG 2016—a unique opportunity to learn and connect

Leslie's Blog

Held at the historic St. Louis Union Station, St. Louis, Missouri, it keeps growing stronger. Most conferences and shows about 3D printing / additive manufacturing (3DP/AM) focus on giving vendors an opportunity to reach potential customers.

Additive Manufacturing Users Group Announces Conference Location

Additive Manufacturing

Louis Union Station to host April 2016 conference. LOUIS, MO., August 17, 2015 – The Additive Manufacturing Users Group ( AMUG ) today announced that its 28 th annual users group conference will be located in St. Louis, Missouri, from April 3 – 7, 2016. AMUG selected St.

Additive Manufacturing Users Group (AMUG) Opens Conference Registration

Additive Manufacturing

Association to celebrate its 30 th anniversary in St. Louis, Missouri. 5, 2018 – The Additive Manufacturing Users Group ( AMUG ) today announced that online registration is now available for its 2018 Education & Training Conference , which will be held in St.

3D printing news Sliced with Materialise, Additive Industries, Elephab, and WASP

3D Printing Industry

3D Software 4WEB digital Additive Industries Aliasghar Ajami AMUG Anjola Badaru Damilola Akinniyi Daniel Auber Elephab Fra Diavolo Keene Village Plastics Louis Materialise Michele Pezza Missouri Powder & Heat Precision AMD Shane Collins St Louis Teatro Dell'Opera The Keene Family TreeD TU Wien Vienna Technical Institute wasp Yasuko Kageyama

Even More Design Excellence Forum Adventures


We still have Troy, Kansas City, St. Louis, Fitchburg, and Providence coming up and there is still time to register. The away team has continued on with their adventures for Design Excellence Forum, ranging from Cincinnati to Ft. Wayne!

Materialise Comes to AMUG


In a few days, it’s time for AMUG , the Additive Manufacturing User Group event in St. Louis, MO. Are you eager to discover our state-of-the-art software for data preparation, metal AM and automatic support generation?

Euromold 2014 - CATI's 3D Printing Team is There

CATI Tech Notes

Luckily, my colleague (Mark Abshire, CATI''s new application engineer in our St. Louis office) and I had a chance to sit next to each other on the plane. The first leg or our trip consisted of a 10+ hour flight to Germany.

New Digital Manufacturing Road Show Helps You Make It in the New Economy

Stratasys Blog for a 3D World

12/09/14: St. Louis, MO. Better. Faster. Smarter. More agile and responsive. Lower costs and higher profits. This is the essence of Digital Manufacturing.

Manufacturers bringing the most jobs back to America

Design 2 Part News

In an interview with 24/7 Wall St., The Reshoring Initiative provided 24/7 Wall St. Boeing announced in the fall of 2014 it would transition several hundred manufacturing jobs from overseas to its plant in St. Louis, Missouri. By Michael B.

Additive Manufacturing Users Group (AMUG)

CATI Tech Notes

On a personal note, I was pleased to see our St. Louis application engineer and friend Mark Abshire receive the president's award. This past Monday I returned from the Additive Manufacturing Users Group (AMUG) conference.

BattleBots as a Teaching Tool: An Interview with Champion Donald Hutson

The Solidworks Blog

Last year, the Hammerheads took home their first ever 1 st place regional win, earning the team a spot in the National Championship in St. Louis. How do you engineer the next major breakthrough in robotics?

Additive Manufacturing Users Group Announces New Board

Additive Manufacturing

Elected by AMUG members during the annual business meeting held at the 2016 AMUG Conference in St. Louis, Missouri, the board’s primary responsibility will be to oversee the April 2017 conference. Member confidence leads to re-elections. CHATSWORTH, CALIF.,

Students Win at Stratasys Extreme Redesign 3D Printing Challenge

Stratasys Blog for a 3D World

Second place: Drill Press CNC Attachment; Joseph Busch; Benilde-St. Margaret’s; St. Louis Park, MN, USA. Features like helipads, docks, and ramps provide greater accessibility into the 20-story Underwater Hotel.

This US manufacturing sector is booming

Design 2 Part News

That sale is worth $7 billion to Boeing , which makes those jets mostly at factories in good old St. Louis, Missouri. By Jake Novak, CNBC. Cheer up, Donald Trump fans!

Stratasys Polyjet 3D Printed Injection Molds….a series part 3

CATI Tech Notes

CATI will be conducting injection molding workshops at the Buffalo Grove, IL 8/18/15, Brookfield, WI 8/20/15, Indianapolis, IN 8/25/15, and St. Louis, MO 8/27/15 office locations.

Additive Manufacturing Users Group Announces Keynote Speakers for 2016 AMUG Conference

Additive Manufacturing

27, 2016 – The Additive Manufacturing Users Group ( AMUG ) today announced its featured keynote speakers for the 2016 AMUG Education & Training Conference , which will be held in St. Louis, Missouri, from April 3 – 7, 2016.

Boeing Moving More Manufacturing to the US

Design 2 Part News

Boeing (IW 500/13) (BA) is moving production of parts for the 777X to its St. Louis facility. In light of the announcement, Boeing will expand its St. Louis composites facility to handle the 777X parts production, which will begin in 2017.

CATI Tech Notes: Have You Seen the NEW SolidWorks Mechanical.

CATI Tech Notes

Louis - May 8th -  Register. CATI Tech Notes. Archives. Subscribe. CATI Search. Subscribe to CATI TechLink Newsletter. Recent Comments. Bob McGaughey on SolidWorks 2014 on a 4k Ultra HD monitor 3840x2160. john white on SolidWorks 2014 on a 4k Ultra HD monitor 3840x2160.

Machining Parts Complete in One Clamping

Design 2 Part News

Louis). By Jim Lorincz, Manufacturing Engineering. Multitasking machines not only enhance productivity, but they also improve quality. The appeal of multitasking machining isn’t difficult to understand.