Desktop Metal Case Study

Studio Fathom

In this blog post, we highlight a featured case study published by Desktop Metal about an injection molding firm who investigates the use of its Studio System for a quick-turn … Read More. The post Desktop Metal Case Study appeared first on What Can You FATHOM? blog 3d printing case study desktop metal quick-turn studio system

Participants wanted for 3DP-RDM feasibility study

Capturing the Value

3d printing 3DP-RDM additive manufacturing feasibility studies re-distributed manufacturing Uncategorized 3D printingpdr3dprdm. View original post.

Study 100

3DP-RDM Feasibility Studies – Call for Proposals 2016

Capturing the Value

The first call for feasibility studies then led to four studies being funded in 2015: The enabling role of 3DP in redistributed manufacturing: A total cost model Dr Martin Baumers, University of Nottingham, and University of Oxford. The presentation slides from the 3DP-RDM Dissemination workshop on 13th January 2016 and reports from this first wave of feasibility studies will soon be available on this blog. Feasibility study competition – 2016. Background.

Study 100

3DP-RDM Feasibility Studies – Call for proposals

Capturing the Value

Feasibility study competition. The primary function of the network is to fund 4-6 feasibility studies across the two years of the network. A competition in 2015 will lead to 2-3 feasibility studies being conducted, with this competition replicated in 2016. These feasibility studies should explore: The features of 3D printing (3DP) technologies that help enable re-distributed manufacturing (RDM). The feasibility studies should be completed by 31st December 2015.

Study 125

Research topics from 3DP-RDM feasibility study proposals

Capturing the Value

As previously mentioned in the post on the close of the 3DP-RDM feasibility study competition , a huge diversity of discplines and approaches were represented in the 34 proposals we received. 3d printing 3DP-RDM additive manufacturing feasibility studies re-distributed manufacturing 3D printing feasibility study competition proposals research topics

Study 100

Results of the 3DP-RDM Feasibility Study Competition

Capturing the Value

The 2016 3DP-RDM Feasibility Study Competition came to a close four weeks ago with us receiving 24 applications. Today I’m able to announce that the review panel have selected the following four projects to receive funding: A feasibility study of mass customisation governance: regulation, liability, and intellectual property of re‐distributed manufacturing in 3D printing , Phoebe Li , University of Sussex.

Study 100

Studying Feasibility: 3D Printing for Spare Parts Production

3DPrint.com

3D Printing Business 3D printed spare parts 3D printing on demand 3d printing service provider 3d printing study Asia Pacific digitalization Electrolux feasibility study household appliances industrialization on-demand 3D printing on-demand manufacturing singapore singapore startup spare parts Spare Parts 3D startup study

Study 72

Introducing the 3DP-RDM Feasibility Studies: A feasibility study of mass customisation governance

Capturing the Value

Following the recent feasibility study competition, the 3DP-RDM network is funding four projects in 2016. In this series of blog posts we introduce the four studies. Today we introduce the second study, “A feasibility study of mass customisation governance: regulation, liability, and intellectual property of re-distributed manufacturing in 3D printing”, which is being led by Dr Phoebe Li at the University of Sussex.

XYZprinting Case Study: TrySight Realized 90 Days Return on Investment of MfgPro230 xS SLS

3DPrint.com

3D Printing Sponsored assistive devices case study MfgPro230 xS selective laser sintering sls sponsored TrySight xyzprinting

UNO Researchers Looking for Study Participants to Test 3D Printed Prosthetic Arms

3DPrint.com

It’s necessary to perform studies on medical devices, 3D printed or otherwise, to make sure they’re working the way they’re supposed to be. 3D Printing 3D printed arm prosthetic 3d printed prosthesis 3d printed prosthetics amniotic band syndrome e-nable nih prosthetic limb research grant study The National Institutes of Health University of Nebraska upper limb difference

Study 72

Introducing the 3DP-RDM Feasibility Studies: 3D Printing Production Planning

Capturing the Value

Following the recent feasibility study competition, the 3DP-RDM network is funding four projects in 2016. In this series of blog posts we introduce the four studies. Today we introduce the final study, “3D Printing Production Planning (3DPPP): reactive manufacturing execution driving re-distributed manufacturing”, which is being led by Dr Martin Baumers at the University of Nottingham.

Study 116

Introducing the 3DP-RDM Feasibility Studies: Driving Innovation in Redistributed Manufacturing

Capturing the Value

Following the recent feasibility study competition, the 3DP-RDM network is funding four projects in 2016. In this series of blog posts we introduce the four studies. Today we introduce the first study, “Driving Innovation in Redistributed Manufacturing: A Comparative Study in the British and Italian Motorsport Valleys”, which is being led by Dr Paolo Aversa at City University London, and Sebastiano Massaro at Warwick University, in collaboration with Prof.

Study 122

Results of the 3DP-RDM feasibility study competition

Capturing the Value

As previously reported, 34 submissions across a wide range of disciplines were received in response to our call for feasibility study proposals. Following a rigorous review process, we are delighted to announce that the following four studies have been selected for funding: Investigating the Impact of CAD Data Transfer Standards for 3DP-RDM – Dr Eujin Pei, Brunel University.

Study 100

Researcher Presents Case Study on Partially 3D Printed Lace-Like Dress

3DPrint.com

Researcher Lushan Sun recently presented her case study about a 3D. 3D Printing 3D Printing Materials 3D modeling 3d print fashion 3d printed apparel 3d printed garments 3D printed lace 3d printed textile 3D printing nylon Adobe case study conference elastic materials fdm flexible filament research paper Rhino textile design textilesLace isn’t just for wedding dresses or your grandmother’s doilies anymore, especially not when 3D printing is involved.

SOLIDWORKS Simulation Copy Features to New Studies

Javelin Tech Tips

Running multiple SOLIDWORKS Simulation studies on a model typically have similar features. You can duplicate a study to make a new copy and then make your modifications. Right-click on the existing study tab and Copy Study. SOLIDWORKS Simulation Copy Study. For example a single load or perhaps a group of connectors is only needed in the new study. You have the ability to drag features from an existing study on top of another Simulation study tab.

Study 40

Mexican Museum Case Study Looks at the Use of 3D Printing in the Construction Industry

3DPrint.com

Benjamin Jodis, a researchers at California Polytechnic State University, recently wrote a case study, titled “Analyzing the benefits of using 3D printing on the Mexican Museum renovation. 3D Printing 3d model 3d printed model California Polytechnic California Polytechnic State University case study construction 3d printing museum shapeways

Scientists Use 3D Printed Models to Further Congenital Heart Disease Studies

3DPrint.com

3D Printing Medical 3D Printing 3d print heart disease 3d printed heart models 3d printed medical models Congenital Heart Disease research heart models Sailner J501Pro 3D printer studyIn the recently published ‘Accurate Congenital Heart Disease Model Generation for 3D Printing,’ researchers explore 3D printing for diagnosis, treatment, and planning in congenital heart disease. View the entire article via our website.

Study 72

Introducing the 3DP-RDM feasibility studies: Supporting SMEs in creating value through 3DP-RDM

Capturing the Value

Following the recent feasibility study competition, the 3DP-RDM network is funding four projects in 2016. In this series of blog posts we introduce the four studies. Today we introduce the third study, “Supporting SMEs in creating value through 3DP-RDM”, which is being led by Dr Peter Dorrington at the PDR Cardiff Metropolitan University. .

Study 100

SOLIDWORKS Simulation 2019 Topology Study Intermediate Results

Javelin Tech Tips

SOLIDWORKS Simulation 2019 now allows Topology Studies to be stopped during intermediate iterations and keep its results. NOTE : If you terminate the solver before reaching convergence, rerunning the study will need to start from the beginning. Here is an example of a Topology study with fixtures on two faces and a force on the opposite end. SOLIDWORKS Simulation 2019 Topology Study.

Study 46

Introducing the 3DP-RDM Feasibility Studies: Organising Production Technology Into Most Responsive States – 3D Print Machine Enabled Networks (OPTIMOS PRIME)

Capturing the Value

Following the recent feasibility study competition, the 3DP-RDM network is funding four projects in 2015. In this series of blog posts we introduce the four studies. Today we introduce the fourth and final study, “Organising Production Technology Into Most Responsive States – 3D Print Machine Enabled Networks (OPTIMOS PRIME)”, which is being led by Prof.

Study 116

How to convert a Static Study to a Nonlinear or Linear Dynamic Study in SOLIDWORKS Simulation 2017

Javelin Tech Tips

SOLIDWORKS Simulation 2017 introduces the ability to take an existing Static Simulation study and convert it to a Nonlinear or Linear Dynamic study. Any valid loads and boundary conditions will be copied to the new study. Warnings are given if specific features from the source Static study fail to copy to the new study due to limitations (such as certain connectors and loads). Copy Study. Copy Study from shortcut menu. Copy Study PropertyManager.

Study 55

Creatz3D Case Study Shows How 3D Printing Improved Design of Multi-Axis Suction EOAT Robot

3DPrint.com

3D Printing Robotics 3d printing and robotics case study Creatz3D EOAT Fortus 450mc polycarbonate Stratasys FDM 3D printing stratasys fortus 450mc tooling Universal Robots3D printing solutions provider Creatz3D, which operates in Singapore and Vietnam, was founded in 2012 and works to bring awareness to the fact that 3D printing adoption needs to be accelerated in. View the entire article via our website.

Re-distributed manufacturing in Healthcare Network – Call for Feasibility Study Proposals

Capturing the Value

One of 3DP-RDM’s sister networks, the Re-distributed manufacturing in Healthcare Network (RiHN) has today launched its call for feasibility study proposals. From the call document: This call aims to support studies that will contribute towards the development of the research agenda for RDM in healthcare. Although studies are not restricted to these six themes, projects are expected to consider challenges common to all these areas, such as: Regulatory aspects.

Study 109

SOLIDWORKS Simulation 2019 Topology Study Constraints

Javelin Tech Tips

Topology studies in SOLIDWORKS Simulation give you insight to help determine the best design for a set of constraints (included in SOLIDWORKS Simulation Professional and Premium packages). SOLIDWORKS 2019 now adds SOLIDWORKS Simulation Topology Study Constraints to achieve the desired results. Be sure to run a standard Frequency Study on the original model (before topology iterations) to ensure it starts off in the permissible frequencies.

Study 43

Finland: Studying the Impact of Medical Imaging Inaccuracies on End-Use Implants

3DPrint.com

3D Printing Medical 3D Printing 3D imaging 3d printed medical implants 3d printing research case study Imaging inaccuracies medical imagingFinnish researchers report on inaccuracies in the AM process chain, releasing their findings in ‘Cumulative Inaccuracies in Implementation of Additive Manufacturing Through Medical Imaging, 3D. View the entire article via our website.

My Highlights of SOLIDWORKS Simulation 2018: the New Toplogy Study

The Solidworks Blog

SOLIDWORKS Simulation 2018 introduces a new study type, the Topology Study, which enables designers and engineers to develop innovative minimum mass components. Based upon linear static loads and restraints, the topology study will ‘remove’ elements from the finite element mesh until the target mass or best stiffness-to-weight ratio shape is reached. Let’s dig into this new study by considering a simple example that I carried out recently.

Study 87

Inexpensive 3D Printed Membrane Feeder Aids in Malaria Studies

3DPrint.com

3D Printing Medical 3D Printing Science & Technology CAD modeling experiment imperial college Imperial College London journal article life sciences malaria medical grade materials membrane mosquitoes open source research paper shapeways sla 3d printing study

Study 56

3D Innovations: Product Case Studies

3D Innovations

We are sharing product case studies over on the 3D Innovations website. Within these case studies you will see the type of projects we have partnered on and how customers have leveraged our design and manufacturing expertise to reduce time to market. The case studies on our website are from a range of industries. The post 3D Innovations: Product Case Studies appeared first on 3D Innovations.

Introducing the 3DP-RDM Feasibility Studies: Investigating the Impact of CAD Data Transfer Standards for 3DP-RDM

Capturing the Value

Following the recent feasibility study competition, the 3DP-RDM network is funding four projects in 2015. In this series of blog posts we introduce the four studies. Today we begin with t he first study, “Investigating the Impact of CAD Data Transfer Standards for 3DP-RDM”, which is being led by Dr Eujin Pei (pictured) at Brunel University. The purpose of this study is to investigate the impact of CAD data transfer standards within the 3DP-RDM landscape.

Data 109

Introducing the 3DP-RDM Feasibility Studies: Redistributing Material Supply Chains for 3D printing

Capturing the Value

Following the recent feasibility study competition, the 3DP-RDM network is funding four projects in 2015. In this series of blog posts we introduce the four studies. Today we introduce the third study, “Redistributing Material Supply Chains for 3D printing”, which is being led by Prof. Second, the study can supply the foundation for practical and experimental work involving waste to resource technology for 3D printing markets.

Study 109

Consortium Studies Use of Automotive Electronics & 3D Printing Satellite Parts

3DPrint.com

German researchers associated with the Integrated Research Platform for Affordable Satellites project are looking for new ways to produce satellites, releasing the details of a recently published. View the entire article via our website.

Zurich: Studying Residual Deformations in Metal Additive Manufacturing

3DPrint.com

Researchers from Zurich University of Applied Sciences in Switzerland continue to explore industrial 3D printing further, sharing the details of their recent study in ‘Simulation and validation of. View the entire article via our website. 3D Printing Metal 3D Printing additive manufacturing research Deformation in metal 3D printing SLM 3D printing Zurich University of Applied Sciences

Design for Additive Manufacturing with SOLIDWORKS Simulation Topology Study

Javelin Tech Tips

Topology Study produces organic geometry that is optimized for its intended application. SOLIDWORKS Simulation 2018 introduced Topology Study , an exiting new study type that utilizes goals and constraints to optimize geometry for its design requirements. SOLIDWORKS Simulation 2019 built on the success of Topology study, adding new types of constraints , and enabling the optimized geometry to be exported as a mesh solid.

Product Design: GoPro Mount Accessory [Case Study]

3D Innovations

3D INNOVATIONS CASE STUDY. Several versions of the prototype were produced in a short period of time, which allowed the team to test and conduct customer validation studies. The post Product Design: GoPro Mount Accessory [Case Study] appeared first on 3D Innovations. The challenge: Develop a hands-free GoPro mount accessory.

Sintratec: Hybrid Materials Laboratory Case Study Focuses on Porous Ceramic Structures

3DPrint.com

“We will benefit more and more from the possibilities of additive technologies,” – Professor Alberto Ortona Sintratec has just released a case study featuring The Hybrid. The post. View the entire article via our website. 3D Printing ceramic 3d printing sintratec Sintratec Kit sls 3d printer The Hybrid Materials Laboratory at the University of Applied Sciences and Arts of Southern Switzerland (SUPSI

UNICAEN: New Bioprinted Tumor Models Help Researchers in France Study Its Biology

3DPrint.com

Studying cancer biology is among the top priorities for researchers around the world. From consortiums to universities, pharma companies, newcomers in the drug development industry, and research. View the entire article via our website. 3D Printing Bioprinting Science & Technology 3D bioprinted tumor model 3D bioprinting technology anti-cancer treatment brain tumor cellink Cellink Inkredible+ CERVOxy france glioblastoma Normandy University of Caen

3D Printed PLA: Heat Treatment & Impact Strength Studies

3DPrint.com

In the recently published ‘A Study of the Effect of Heat Treatment on 3D Printed PLA Impact Strength,’ author Suresh Thota presents a thesis at South Dakota State University, centered. The post 3D. View the entire article via our website. 3D Printing 3D Printing Materials 3D Printed PLA Impact Strength Flash Forge Creator Pro Flash print software PLA sample

Case study: Faster product launch with 3D printing as bridge manufacturing technology

Additively Blog

Case study: MagnebotiX can launch their micro robotic system fast by using 3D printing as a bridge manufacturing technology

How to define a Thermostat in a SOLIDWORKS Simulation Study

Javelin Tech Tips

Did you know you can set up a thermostat directly in your SOLIDWORKS Simulation Transient Study which will turn the heat power on/off based on the temperature? To access this function, from your simulation tree, right click on thermal loads in the simulation study tree and click Heat Power. The post How to define a Thermostat in a SOLIDWORKS Simulation Study appeared first on The Javelin Blog. SOLIDWORKS Simulation Heat Transfer SOLIDWORKS Simulation Transient Study

Study 40

Simulation Study: Empowering Innovation

Tech Clarity

The post Simulation Study: Empowering Innovation appeared first on Tech-Clarity. How do leading companies empower design engineers with simulation? Please share your experience. We are conducting new research on simulation and exploring questions such as how does simulation help design engineers? What are the best ways to help design engineers adopt simulation tools? What should you look for in a simulation solution for design engineers? If you already […].

Case Study of YSoft 3D Printing Classroom in Czech Republic Yields Important Results

3DPrint.com

3D Design 3D Printers 3D Printing Education 3D modeling 3d printing 3d printing education 3d printing in school 3d printing solutions case study Czech Republic drawing STEM education Technical School Prosek YSoft YSoft be3D eDee 3D printer YSoft SafeQIt’s pretty clear by now that 3D printing in the classroom is extremely beneficial to students; they enjoy learning and using the technology, and it helps prepare them for the future, as 3D. View the entire article via our website.

In a Different Tongue: 3D Printed Tongue Offers New Methods for Studying Oral Treatments

3DPrint.com

Researchers at the University of Leeds, in collaboration with the University of Edinburgh, have developed the first ever 3D printed biomimetic tongue surface. The material features mechanically. View the entire article via our website.

Study 74

Case Study: A 3D Printed Patient Specific Partial Finger Prosthesis

3DPrint.com

From the University of Nebraska at Omaha, researchers Keaton Young, James E. Pierce, and James M. Zuniga explore prosthetics made via 3D printing in ‘Assessment of body-powered 3D printed. View the entire article via our website. 3D Printing Featured Stories Medical 3D Printing 3d printed prosthetics pla ultimaker 2 extended University of Nebraska at Omaha