AM System Manufacturer Growth

Wohlers Talk

The additive manufacturing (AM) industry continues to experience dramatic growth in the number of companies that produce industrial (above $5,000) AM systems. The total number of AM systems manufacturers in 2017 will be published in Wohlers Report 2018 in Q2 of this year.

System 151

3D Systems – Healthcare

Wohlers Talk

I visited 3D Systems’ new healthcare facility in Denver, Colorado for the first time on Monday. Vyomesh “VJ” Joshi, the relatively new CEO at 3D Systems, led much of the discussion, along with other senior managers. 3D Systems acquired the company in April 2014.

System 184

Growth of Metal AM Systems

Wohlers Talk

Additive manufacturing (AM) systems for metal parts are increasing in popularity worldwide, as shown in the following chart. Much of the growth and subsequent decline were due to ExOnes Imagen dental systems, which made gold copings for crowns and bridges.

System 239

3D Systems’ new focus on additive manufacturing

Leslie's Blog

With a new president and CEO, 3D Systems used the IMTS Show to announce it is taking its 3D printing businesses in a new direction—focusing on additive manufacturing for production. Lastly, new additions to the 3D Systems’ management team include: –Herbert Koeck, SVP, Go-to-Market, EMEA.

High Accuracy with the 3D Systems DMP Flex 100

Deelip

A couple of weeks ago, I posted a video of a heat exchanger which was redesigned for Direct Metal Printing and printed on a 3D Systems DMP Flex 100. 3D Printing Featured Opinions 3D 3D Systems Direct dmp flex metal printing

Systems Engineering Buyer’s Guide

Tech Clarity

Thank you for your interest in the Systems Engineering Buyer’s Guide! Tech-Clarity’s Systems Engineering Buyer’s Guide helps manufacturers develop criteria to evaluate software solutions to support Systems Engineering on a set of high level criteria.

PTC 52

Launch System Payload Market – Strategies Adopted by the Keys Players in the Market

BIS Research

According to a market intelligence report published by BIS Research, titled ‘ Global Launch System Payload Market – Analysis and Forecast (2018-2028 ) ’, the market was estimated at $7.37billion in 2017 and is expected to reach $23.53

UCL School of Pharmacy: 3D Prints Affordable Continuous Flow Systems

3DPrint.com

Researchers for the UCL School of Pharmacy are delving further into the use of 3D printing and continuous flow systems with a recent published paper, ‘Modular 3D Printed Compressed Air Driven. 3D Printing 3D printed continuous flow systems 3D printing in chemistry Tinkercad UCL School of Pharmacy Ultimaker 3D printer

Coordinate System setup for CNC Milling using SOLIDWORKS CAM Standard

Javelin Tech Tips

In this article, we will define our Coordinate System for 2.5/3 axis milling with SOLIDWORKS CAM Standard. The Coordinate System setup indicated on the part will become the work offset for machining (ex. Double-click on Coordinate System in the CAM Feature Tree.

Nexxt Spine to use MTS testing systems for 3D printed spinal implants

3D Printing Industry

Nexxt Spine, an Indiana-based spinal implants manufacturer, has announced that it will develop 3D printed bone healing spinal implants with the help of MTS Systems Corporation, a global manufacturer and supplier of simulations and testing systems.

New 3D printer materials from 3D Systems, Liberty, Evonik

3D Printing Industry

3D Systems launches FabPro Elastic BLK Leading South Carolina 3D printer OEM 3D Systems has launched a new liquid polymer for its FabPro 1000. Materials 3D Systems Dr. Simon Pike Evonik FabPro 1000 FabPro Elastic BLK Liberty Mark Zhao TPM 3D

3D Printing News Sliced: 3D Systems, Digital Metal, XJet, Makerbot

3D Printing Industry

Read on to learn more from the likes of 3D Systems, Digital Metal, XJet, Aleph Objects and Makerbot.

Interview with Phil Schultz Executive Vice President Operations 3D Systems

3DPrint.com

Phil Schultz is the Executive Vice President, Operations, 3D Systems. 3D Printing 3D design and printing service 3D Print Bureau 3d print service 3d systems on demand quickpartsPhil spent 25 years at HP rising to become GM and VP of their Imaging & Printing group. Then he initiated and created. View the entire article via our website.

3D Systems metal additive systems building U.S. Navy warships

3D Printing Industry

3D Systems’ stock price is buoyant today after the announcement of a naval warship building deal with Huntington Ingalls Industries, the largest military shipbuilding company in the United States. based 3D Systems and Huntington Ingalls Industries’ Newport News Shipbuilding division of Virginia aims to qualify metal additive manufacturing for […]. Aerospace 3D Systems Charles Southall Kevin Mcalea Newport News Shipbuilding ProX® DMP 320

3D Systems launches upgraded Geomagic and 3DXpert software before SOLIDWORKS World 2019

3D Printing Industry

Days before SOLIDWORKS World 2019, 3D Systems, has announced new versions of its CAD software solutions Geomagic and 3DXpert. 3D Software 3D Systems 3DXpert Dassault systemes Geomagic Radhika Krishnan SOLIDWORKS 2019

Smart Systems Buyer’s Guide for Systems Engineers and IoT Solution Architects (white paper)

Tech Clarity

How can manufacturers design systems with greater confidence the system will work as designed? The guide targets systems engineerings, IoT solution architects, and others involved with designing systems.

3D Systems video from EuroMold 2014

DIY 3D Printing

3d Systems shows their product line on EuroMold 2014. 3d systems euromold 2014 europe It is presented by the CEO Ari Reichental. Nice job Ari!

Video 172

Here they come—faster additive manufacturing systems

Leslie's Blog

However, with the recent claims HP made about deliver a 10 fold increase in build speed with its multi-jet fusion system, it’s not suprising to learn that established manufacturers of AM machines have been hard at work making improvements to speed, as well as other desired features.

Creating Bottle Openers With the Desktop Metal Studio System

Modern Tech

Here at TriMech’s Connecticut office, we had been printing in 17-4 stainless steel using the Desktop Metal Studio Printer beta unit, but in December of 2018, we installed the complete Desktop Metal Studio System !

3d Systems. Go. Away.

Chopmeister's 3D Printing Stuff

My patent related blog post dealt a lot with Stratasys, so I think I kinda neglected the other star-player in the 3d printing world - 3D Systems. Let's have a closer look at one of them: There is a video ad posted by 3d systems for the CubePro available HERE.

System 130

Complex 3D Printed 5 Axis Rack System

DIY 3D Printing

Source: Henry Segerman. 5 axis industrial 3d printer

System 151

BAE Systems Air acquires Simufact Additive for metal 3D printing

3D Printing Industry

The multinational aerospace company, BAE Systems, has acquired Simufact Additive, a simulation software by a California-based technology company, MSC. 3D Software BAE Systems Hexagon AB MSC Simufact Simufact Additive Simufact Forming Simufact Welding

3D Systems SLAbot-1 Stereolitographic Robotic Manufacturing Cell

DIY 3D Printing

3D Systems describe it as: The SLAbot-1 uses an industrial robotic arm, producing parts in sequence. Here is SLAbot-1 in action: Here is a more detailed presentation of the system which is based on a patent that is 30 years old: SLAbot is clearly based on DENSO Robotics arm.

3D Systems launches enhanced Quickparts prototyping service

3D Printing Industry

South Carolina based 3D Systems (NYSE:DDD) has updated its On Demand Manufacturing services with the Quickparts fast-turn prototyping service. 3D Printing 3D printing bureau 3D Systems 3D Systems On demand 3D Systems Quickparts On demand manufacturing QuickpartsThe Quickparts service will now offer metal and plastic.

Link3D launches Additive Manufacturing Recommendation System to simplify material selection

3D Printing Industry

New York PLM software developer Link3D has announced the launch of the Additive Material Recommendation System (AMRS). Integrated within the workflow of the company’s additive manufacturing execution system (AMES), AMRS allows engineers to filter available materials based on qualitative characteristics and technical properties. 3D Software additive manufacturing execution system Additive Material Recommendation System AMES AMRS LINK3D Renaud Vasseur Shane Fox

Interview with Dynamism and Desktop Metal on the Ultimaker S5 and DM Studio System

3DPrint.com

3D Printers 3D Printing Exclusive Interviews CES 2019 desktop metal DM Studio System Dynamism Studio System ultimaker Ultimaker S5Dynamism has been a retailer of 3D printing technology for over two decades, and the company always does well at keeping up with the latest, most talked-about 3D printers. Currently, one of its. View the entire article via our website.

Pantone Matching System standardizes colors for FiberForce 3D filament

3D Printing Industry

Italian 3D printer filament manufacturer FiberForce has launched a line of materials certified to the Pantone Matching System (PMS) by Pantone LLC. Materials FiberForce Francesco Berton Pantone Pantone Matching SystemBy adopting the international color standard for its filaments, FiberForce is providing customers with a universally recognizable color chart, and assured uniformity across their 3D printed products. According to Francesco Berton, CEO of FiberForce, this […].

Top Ten Signs You’ve Outgrown Your PDM System (webcast)

Tech Clarity

How can manufacturers tell when they’ve outgrown their Product Data Management system? The interactive presentation will share what’s missing in most basic PDM / Engineering Document Management (EDM) systems and what.

PTC 56

Vader Systems metal 3D printer and AM systems, Polaris, Magnet-o-Jet and Ares Microsphere

3D Printing Industry

Vader Systems will be familiar to readers of 3D Printing Industry from our earlier articles reporting on the New York based company. 3D Printers Ares Microsphere Production System liquid metal 3D printing Magnet-o-Jet Polaris Vader Systems Zach VaderPowering their promise to, “build the factory of tomorrow 100x faster than existing market solutions with safer handling and less waste” is a patented 3D printing technology referred to as Magnet-o-Jet. Zach Vader, […].

TRIDITIVE’s SCALADD consortium welcomes MIM equipment manufacturer Elnik System

3D Printing Industry

TRIDITIVE, a Spanish 3D printer manufacturer, has announced a strategic collaboration with Elnik Systems, a U.S. Business Ecrimesa Group Elnik Systems Mariel Díaz Castro SCALADD Triditive University of Las Palmas de Gran Canaria University of Oviedomanufacturer of metal injection molding (MIM) equipment. This partnership will provide TRIDITIVE’s SCALADD consortium with MIM debinding furnaces and tools.

3D Systems: Changing the Game in Healthcare

3D Printing Review

Chuck Hull, the inventor of stereolithography and founder and Chief Technology Officer of 3D Systems, probably didn’t imagine Stereolithography as a game-changing tool for the medical industry, but it has had a tremendous impact on healthcare and promises even greater benefits in the future.

System 130

3D Systems on why medical simulation and 3D printing will mold the physicians of the future

3D Printing Industry

3D Systems, in particular, has contributed significantly to the advancement of surgical procedures with this technology. Medical & Dental 3D Systems Ran Bronstein RobotiX Mentor Simbionix Stryker Virtual Surgical PlanningAdditive manufacturing and 3D scanning have been increasingly integrated within the healthcare sector.

Desktop Metal Introduces New Studio System+ and Studio Fleet 3D Printing Systems

3DPrint.com

The Desktop Metal Production System was the. 3D Printers 3D Printing desktop metal DM Studio System Studio Fleet Studio SystemLast year, Desktop Metal got the attention of the 3D printing industry when it introduced the technology it had been working on over the past few years. View the entire article via our website.

3D Systems ProX DMP 320 Metal 3D Printer

DIY 3D Printing

3D Systems released a new industrial metal laser sintering printer: the ProX DMP 320. 3d systems industrial 3d printer metal 3d printing new diy 3d printer titaniumWhat is the price?

MADspace Advanced Robotics System 3D Printable Rover

DIY 3D Printing

The MADspace Advanced Robotics System (M.A.R.S.) rover is a 3D printable space exploration rover. It can be used in education, DIY science and development.

Xerox acquires Vader Systems, steps into $8 billion 3D printing industry

3D Printing Industry

Xerox, the American manufacturer of printers and photocopiers, has acquired Vader Systems, a New York-based manufacturer of the liquid metal jet 3D printers. Business Desktop Metal idc Janos Veres John Visentin Keith Kmetz PARC Tuan TranPham University of Nottingham Vader Systems xerox Zach VaderAs previously reported by 3D printing industry, most recently in October 2018, Xerox has long had eyes on additive manufacturing opportunities.

Top 11 Features in SOLIDWORKS 2019: Structure System

Modern Tech

It's time to reveal our sixth favorite feature in SOLIDWORKS 2019 : the structure system tool. The structure system tool is a brand-new way to create weldments. Weldments are a key feature of many designs and SOLIDWORKS has long been an innovator in providing tools to create weldments.

Tools 59