Tutorial Tuesday 11: Topological Mesh Modeling with TopMod

Shapeways Blog

It’s easier than you might think — if you know how to use TopMod. TopMod is a really unique tool to have in your 3D printing toolbox. Dr. Ackleman is Professor at Texas A&M University, and also, not coincidentally, the creator of TopMod. Getting started with TopMod.

Tutorial Tuesday 7: What 3D Design Software Should I Use?

Shapeways Blog

Mathematica + MeshLab + TopMod + Meshmixer. First, we used Mathematica to export the polyhedron’s vertex set to STL, MeshLab to resize the object by a particular scaling factor, and TopMod to create and stylize the wireframe.

Trending Sources

Tutorial Tuesday 32: Learn to Fly With Wings3D

Shapeways Blog

Wings3D is free and open source, but includes much of the functionality of paid professional software like Autodesk’s 3ds Max , as well as topological mesh modeling software like TopMod.

MakerHome: Day 256 - Friday Fail: Fixed-by-Tinkercad edition

MakerHome

Usually when a model wont slice with MakerWare, I use MeshLab or TopMod to find and fix the problem. MakerHome. One 3D print every day from home, for a year. Welcome to MakerHome. Current mission: If youre new to 3D printing, where do you start?

MakerHome: Day 194 - Pentagonal Hexecontahedron

MakerHome

On Day 192 we developed a method for doing this using Mathematica, MeshLab, and TopMod, and tested three types of meshes. MakerHome. One 3D print every day from home, for a year. Welcome to MakerHome. Current mission: If youre new to 3D printing, where do you start?

Day 135 - Six Handles

MakerHome

Today''s model is a sculpture made with the excellent and innovative mesh-wrangling software TopMod. Since my way-back math roots are in topology, TopMod is like coming home; everything about it speaks my language.

Is your 3D model a mess? Make it printable!

Shapeways Blog

The screenshot below shows what it looked like when I did this in TopMod ; I added the closed triangle faces, and everything seems fine: Nice! What do you do when your 3D model is broken?

Day 234 - S(5,2,(1,1,-1,1))

MakerHome

Technical notes, TopMod flavor: I am very excited to report that I actually constructed this knot by hand, one arc at a time, in TopMod. Export to STL; this may take a minute because TopMod will have to further refine your mesh to be triangular as it is performing this export.

Day 299 - Tricolored representation of 7_7

MakerHome

Here is what he has to say about his design process for this knot model: This knot started with the typical model for 7_7, exported from KnotPlot and then imported into TopMod. Note that in TopMod, holding down option and then clicking will allow you to rotate the view.

Day 136 - Six Handles Fancy

MakerHome

Today we took yesterday''s TopMod model and created crusts along certain face loops to get a more open, fancy, swirly design: STL file: [link] Thingiverse link: [link] Settings: We used the same custom MakerWare settings from Day 110 ''s knot, to minimize supports and support attachment to the model.

Day 278 - Silver pentagonal hexacontahedron bracelet

MakerHome

Back on Day 218 we printed a bracelet built by extracting the center rings of a Pentagonal Hexacontahedron in TopMod. This week we finally received the stainless steel version we ordered from Shapeways , and it is beautiful!

Day 218 - Poly/giraffe bracelet

MakerHome

Today we designed a bracelet by using TopMod to extract a ring of irregular pentagons from the center of a Pentagonal Hexacontahedron wireframe (our "giraffe polyhedron" from Day 194 ).

Day 137 - Clover knot

MakerHome

More TopMod ! Technical notes, TopMod flavor: This model was made by starting with a cube and then adding handles to adjacent faces, just as we did in Day 135 , but this time with a twist.

MakerHome: Day 277 - Friday Fail: Diameter-is-not-radius edition.

MakerHome

The fact that only two of the clips were needed here is itself a miracle; Im usually tied up with five or six store-bought clips: These power hair clips were made in OpenSCAD with some mesh management in TopMod afterwards to smooth them up a bit. MakerHome.

MakerHome: Day 212 - Stylized Catalan Wireframes

MakerHome

The wireframe designs were made using Mathematica, MeshLab, and TopMod. Use TopMod to remove edges or vertices that dont belong in the wireframe, and then create the frame and remesh: Import OBJ Wireframe 0.250. MakerHome. One 3D print every day from home, for a year.

Top 20: Most Popular 3D Modeling & Design Software for 3D Printing (2017 Update)

i.materialise

Creating a printable design is the crucial first step in the 3D printing process – and everyone seems to have a different opinion on which software is the most suitable for getting this job done. So what’s the most popular 3D modeling software for 3D printing? Read on to discover the top 20!

Top 25: Most Popular 3D Modeling & Design Software for 3D Printing

i.materialise

Creating a printable design is the crucial first step in the 3D printing process – and everyone seems to have a different opinion on which software is the most suitable for getting this job done. So what’s the most popular 3D modeling software for 3D printing? Read on to discover the top 25!

MakerHome: Day 192 - Mesh-testing a Gyroelongated Pentagonal.

MakerHome

This afternoon I was thinking about this problem and suddenly remembered that there is a little button in TopMod that looks like this: Problem solved! MakerHome. One 3D print every day from home, for a year. Welcome to MakerHome.

MakerHome: Day 197 - Pentagonal Icositetrahedron

MakerHome

Designed using Mathematica, MeshLab, and TopMod as described in Day 194 , with scaling factor determined as described in Day 195. MakerHome. One 3D print every day from home, for a year. Welcome to MakerHome. Current mission: If youre new to 3D printing, where do you start?

MakerHome: Day 202 - Triakis Octahedron

MakerHome

This is because of the remeshing that I am choosing in TopMod, specifically the "Doo Sabin" remeshing. MakerHome. One 3D print every day from home, for a year. Welcome to MakerHome. Current mission: If youre new to 3D printing, where do you start?