3DP-RDM Dissemination and Scoping Workshops

Capturing the Value

We will be hosting two days of 3DP-RDM workshops on 13-14th January 2016 in Cambridge to which you are warmly invited to participate. A provisional agenda for the workshops can be found here. On the afternoon of 13th January we’ll be running a dissemination workshop featuring presentations from the four 3DP-RDM feasibility studies. On the 14th January we will then have a scoping workshop to identify future research directions and possible feasibility study topics.

Report 100

SMEs wanted for 3DP-RDM workshop in Cardiff

Capturing the Value

3d printing 3DP-RDM additive manufacturing workshop 3D printing Cardiff Cardiff Metropolitan University PDR Peter Dorrington SME

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Trending Sources

Carl’s Workshop

Wohlers Talk

We were less than two minutes into our meeting at the impressive Autodesk Gallery when Carl asked if I wanted to see the company’s Pier 9 Workshop. Entrance to Autodesk Pier 9 Workshop, courtesy of Metropolis and Ryan Hughes.

Material Makespaces and the Circular Economy workshop in London

Capturing the Value

The workshop is a joint collaboration between the University of Oxford Department of Engineering, Fab Lab London, Wevolver, and the Ethical Filament Foundation.

Presentations from 3DP-RDM Dissemination workshop

Capturing the Value

On the 13th January 2016, presentations from the first four 3DP-RDM feasibility studies were made at the 3DP-RDM Dissemination workshop in Cambridge. 3d printing 3DP-RDM additive manufacturing feasibility studies Presentation re-distributed manufacturing 3D printing dissemination workshop Duncan McFarlane EPSRC ESRC Eujin Pei Hans Veldhuis Malte Ressin Martin Baumers Matthias Holweg Redistributed Manufacturing Healthcare Research Network

Data 100

Makefast Workshop unlocks recipe to 3D print extreme overhangs without supports

3D Printing Industry

The technique has been developed by Makefast Workshop, a prototype and design bureau based in Dealware, Ohio. Makers FFF hack Makefast Workshop midair 3D printingA collection of springs demonstrates a new FFF hack to 3D print extreme overhangs without using any supports.

Ohio 104

3DP-RDM Scoping Workshop – Discussion Activity 1 Outputs

Capturing the Value

The 3DP-RDM Scoping Workshop of 30th January 2015 featured two distinct discussion activities. On arrival at the workshop, participants were assigned to tables to create multi-disciplinary groups of 5-6.

Groups 141

3DP-RDM Call for Participation – Scoping Workshop 30 January 2015

Capturing the Value

On the afternoon of 30 January 2015, 3DP-RDM will be hosting a scoping workshop at the Institute for Manufacturing in Cambridge. The purpose of the scoping workshop is to explore the themes that could be investigated through 6-9 month feasibility studies. The workshop will involve small, multi-disciplinary discussions, with these discussions helping to identify areas of study. Following the workshop, proposals for feasibility studies will be invited.

3DP-RDM Scoping Workshop – Discussion Activity 2 Outputs

Capturing the Value

The 3DP-RDM Scoping Workshop of 30th January 2015 featured two distinct discussion activities. This workshop and its reporting could not have been possible without the work of many others.

Additive MFG Workshop Sept 25

Studio Fathom

FATHOM is a sponsor of this month’s Additive Manufacturing Workshop for Small Businesses this month — hosted by The California Network for Manufacturing Innovation. The post Additive MFG Workshop Sept 25 appeared first on FATHOM - 3D Printer Sales, Rapid Prototyping, Design.

Weta Workshop Acquires Massivit 3D Printer for Creation of Giant 3D Printed Movie Props


3D Printers 3D Printing 3d printed movie props 3d printed props Massivit Massivit 1800 movies Weta WorkshopMassivit 3D, as its name suggests, is known for its massive 3D printers, and they’ve traveled around the world and participated in some truly fascinating projects, such as the restoration of an. View the entire article via our website.

NIST Photopolymer Additive Manufacturing Workshop: Roadmapping a Future for Stereolithography, Inkjet, and Beyond

3D Printing Industry

Last week, the National Institute of Standards and Technology (NIST) and RadTech, hosted its first Photopolymer Additive Manufacturing Workshop (PAM) 2019, in Boulder, Colorado, in the efforts of “Roadmapping a Future for Stereolithography, Inkjet, and Beyond.”

‘MakersAffair’ to launch 3dprinting workshops in London

Philip Cotton

The answer could be here with the launch of Maker’s Affair 3dprinting workshops in London. The idea of the company is to provide quality workshops on 3dprinting for complete beginners. As well as 3dprinting workshops, Loh is providing a 3dprinting service via 3DHubs.

Makers 141

Home workshop tour by Brent Rubell

DIY 3D Printing

Ever wanted to see what is in someones 3d printing workshop? Here is video tour by Brent Rubell showing his workspace and machines. Nice mancave.

MBot 194

Makefast Workshop Offers Material Hacks for 3D Printing


The team at Makefast Workshop is made up of the dynamic and brilliant Maura Atwater and Adam Kumpf, who bill themselves as Navigator and Melder, respectively. 3D Design 3D Printing 3D Printing Materials 3d printing hacks Adam Kumpf ball bearing drink chiller hacks makefast workshop maraca materials Maura Atwater metal open source sand thingiverse water

Aluminum Profiles DIY 3D Printer by Thomas Workshop

DIY 3D Printing

Recently I found this larger volume (40cm3) machine by "Thomas Workshop" on Instructables. I always like to see new 3D printer designs and builds by different people. It is fully made from common aluminum profiles and Thomas did put some effort to document and present his work process.

Workshops for Warriors Announces Johnston Companies Partnership and $100,000 Pledge


3D Design 3D Software Business Education 3D CAD software 3D printing & CNC machining 3d printing for veterans 3D technology for veterans advanced manufacturing CADCAM Johnston Companies non-profit solidprofessor solidworks unemployment veterans workshops for warriors Workshops for Warriors programThe majority of civilians will never know the horrors our fighting men and women face on the battlefield, far away from their loved ones.

3DP-RDM Scoping Workshop 2016 – Discussion Activity 1 Outputs

Capturing the Value

In the same vein as the first scoping 3DP-RDM workshop in 2015, the 2016 scoping workshop featured two distinct discussion activities. 3d printing 3DP-RDM additive manufacturing re-distributed manufacturing scoping workshop 3D printing feasibility studiesThese activities were aimed at identifying research topics for investigation during the feasibility studies that will be conducted later in the year. The process used was the same as in 2015.

Workshops for Warriors Receives $75,000 in Funding from JPMorgan Chase, Plus a New Patent


Veterans' Day workshops for warriors Workshops for Warriors programWhile it’s important to remember and honor the sacrifices and heroism of those who have fought for our country, it’s even more important to remember that their fight isn’t over when. View the entire article via our website. 3D Design 3D Software Business 3D technology for veterans Fish & Richardson JPMorgan Chase & Co.

Useful DIY 3D Printed Tools for your Workshop

DIY 3D Printing

Marius Hornberger is a master woodworker who made a video showing how he uses many 3d printed tools in his workshop. Cool stuff, His Thingiverse page with all of the files: [link]. 3d printed cool things to 3d print diy wood workspace

Tools 107

3D Hubs Launches Special Filament Workshop Worldwide

3D Printing Industry

This year, the online community is taking these global meet-ups a step further, launching a new series of workshops in which attendees will get hands on experience with exciting new products recently released to the 3D printing industry. By Michael Molitch-Hou.

3D Print Big! WASP and Opendot to Offer Five-Day Workshop on Large-Scale 3D Printing


3D Design 3D Printing 3D design course 3d design workshops 3d printing class 3d printing classes 3d printing course 3d printing courses 3d printing workshop 3d printing workshops large-scale 3d printing Massimo Moretti Opendot Slic3r TreeD TreeD Filaments waspWASP (World’s Advanced Savings Project) has developed multiple 3D printers in varying sizes, but they’re probably best known for their gigantic mega-printers, capable of 3D printing.

Educational Business Wins Hack My Van Contest, Will Offer Portable 3D Printing Workshops in New Zealand


3D Printing Business Education 3d printed educational kits 3d printing business 3D printing educational programs 3D printing learning 3d printing workshops australia competition contest grant Hack My Van Mercedes-Benz MindKits new zealand pitch portable 3D printing tools small business stem STEM curriculum STEM education STEM learning workshops

FabLab San Diego & XYZprinting to Offer Historical 3D Printing Workshop with 1:1 Student-to-Printer Ratio


3D Design 3D Printing 3d printing workshop 3d printing workshops da vinci da vinci 3d printer fablab fablab san diego workshops xyzprinting While it’s exciting to read about all the innovations and designs being sprung forth into the 3D printing world by so many new and creative makers, perhaps you have some concepts as well as... View the entire article via our website.

FATHOM Engineering + Clearly Workshop

Studio Fathom

The post FATHOM Engineering + Clearly Workshop appeared first on FATHOM // 3D Printer Sales, Advanced Prototype Fabrication, Bridge-To-Production Low Volume Manufacturing. Clearly is a non-profit organization that grapples with the question: how can the whole world see?

DrawBot Badge – Workshop


The conference will be “Getting Started in Small Scale CNC and Robotics (Build a CNC Badge)” By the end of the workshop you will have built, programmed and learned to use the DrawBot Badge. Woot!

The Local Nexus Network: Launch Event and Scoping Workshop

Capturing the Value

The theme of this network launch event and scoping workshop is “Building sustainable local nexuses of food, energy and water: from smart engineering to shared prosperity” It will be held on Monday 23rd March 2015 from 10am – 4.30 re-distributed manufacturing scoping workshop energy system food system launch event local nexus Local Nexus Network water system The 3DP-RDM network is one of six networks being funded in 2015-16 on the theme of re-distributed manufacturing.

Sliced 3D Printing Digest: KLM airlines, Waseda University, Milacron Holdings and Weta Workshop

3D Printing Industry

3D Printing Adam Savage Amsterdam cool system cooling system David Baucus Delft Blue FDM FFF Ghost in the Shell Jared Haley Kensuke Takagishi KLM Local Makers Milacron milacron holdings post processing 3d prints robot skeleton robots Shinjiro Umezu Waseda University Weta WorkshopIn this edition of Sliced, 3D Printing Industry look at a 3D printing project from KLM airlines, research at Japan's Waseda University, a partnership for.

Japan 86

SOLIDWORKS 2019 workshop by Solid Solutions, a three hour introduction

3D Printing Industry

SOLIDWORKS is among the most popular and widely used professional CAD/CAE software, primarily for product designing and engineering applications.

3D Printing in Metal Workshop: Take a Peek at Our Speaker Lineup


3D Printing Education Metal 3D Printing 3d printing class 3d printing classes 3d printing course 3d printing courses 3d printing in metal 3d printing workshop Dr. Arif Sirinterlikci Dr. Gary Halada Tim RuffnerWhat’s stopping you from pursuing your 3D printing in metal endeavors? Learn the 3D printing in metal process from start to finish in our new online course, an overview of additive manufacturing in. View the entire article via our website.

Portugal RepRapAlgarve Workshop Group Makes Fully 3D Printed Body To Scale


3D Design 3D Printing 3d printed clone 3d printed figure 3d printed person 3d printed replica 3d printing workshop full size 3d printed person open source 3D printing Prusa i3 3D printer RepRapAlgarve workshopHe’s here….(cue cue in the creepy Halloween music)…that’s right, folks–the moment we’ve been waiting for with excitement, anticipation, and even fear, has finally arrived. He’s a fully 3D printed body fabricated to scale.

Laser Institute’s LAM Workshop Explores State of the Art in Additive Manufacturing

3D Printer

Lasers are an integral part of many 3D Printing processes, making it a natural fit that the Laser Institute of America [LIA] annually produces the Laser Additive Manufacturing [LAM] Workshop.

Stratasys Provides 3D Printing Job Training and Certification Initiatives to Veterans with Workshops for Warriors


3D Printers 3D Printing Education 3d printing curriculum 3d printing for veterans 3D technology for veterans advanced manufacturing donation educational programs Fortus 450mc manufacturing non-profit San Diego STEM education stratasys stratasys fortus 450mc tech career training veterans workshops for warriorsOver the last few years, Stratasys has worked tirelessly to make sure that our nation’s veterans have access to quality 3D printed prosthetics and orthotics.

FIDM and Designer Daniel Garcia to Offer Workshop on 3D Shoe Design


3D Design 3D Printing Education 3d design workshops 3D printed footwear 3d printed shoes Daniel Garcia Fashion Institute of Design & Merchandising FIDM3D printed shoes are a relatively new development, but they’re certainly a big development, and a fast-growing one. The increasing variety and availability of flexible 3D printing materials. View the entire article via our website.

Laser Institute of America bring additive manufacturing workshop to Texas

3D Printing Industry

The Laser Institute of America (LIA) will host a Laser Additive Manufacturing Workshop (LAM®) February 21-22, 2017 in Houston, Texas. This isn’t just a workshop,” says. Event Fraunhofer USA GE General Electric Gigaom HP IPG Photonics Jim Naugle Laser Institute of America LIA Milan Brandt optomec OSHWA Peter Weijmarshausen RMIT University shapeways Trumpf

Texas 87

Kidmob to Hold 2nd Annual 3D Printed Prothetics Workshop

3D Printing Industry

Last year, KidMob held a workshop at the Brown University School of Engineering called Superhero Cyborgs, a build-your-own prosthetics workshop for kids ages 7-16. Now, KidMob is to repeat the workshop, and is offering active participation in the event.… By Shane Taylor.

Second Redistributed Manufacturing Healthcare Research Network (RiHN) workshop – 28 April 2015

Capturing the Value

This workshop will be hosted by Redistributed Manufacturing Healthcare Research Network (RiHN). This is the second of two workshops; the first was oriented towards medical devices, diagnostics and dentistry. healthcare re-distributed manufacturing workshop EPSRC feasibility studies Redistributed Manufacturing Healthcare Research Network RiHN targeted healthcare production Personalised medicine is estimated to grow to two billion euros by 2018.

Workshop for Warriors: Helping Veterans Transition to Civilian Life

The Solidworks Blog

Almost 16 years after leaving the Air Force, I had the honor and pleasure of meeting Hernan Luis y Prado with Workshops for Warriors as part of my role here at SolidWorks. Hernan and Workshop for Warriors are simply leading the way. .

Certified in SOLIDWORKS & Headed for Advanced Manufacturing Careers: 46 Graduate in Workshop for Warriors Fall Class


3D Design 3D Software 3D design instruction 3d printing education Dassault Systèmes SOLIDWORKS solidworks SOLIDWORKS education workshops for warriors Workshops for Warriors programMost soldiers who are on active duty, are on 24/7. Often raised to exulted heights as they leave their communities and serve their country, after duty, those who excel are given medals and awards. View the entire article via our website.

Hackaday Workshop and #Badgelife Experience


Last weekend at the 2018 Hackaday Superconference I gave a workshop called “Small Scale CNC/Robotics Workshop (Build a CNC Badge)” It was a ton of work and a bit stressful, but I think it worked out about as good as I could have hoped. Workshop Approval Process.

How to Build a Backyard Workshop for $2,000?


A DIY backyard workshop — for 3D printing? Source: SolidSmack]. Read the whole entry. » » hardware

3D Creative Workshops Launches Luxury Christmas Jewellery Line

3D Printing Industry

The latest to venture into this field, just in time for Christmas, is Edinburgh based duo John Edwards and Renate Kriegler Edwards, from high end designer brand 3D Creative Workshops, with their new 3D Luxury brand.… By Davide Sher.

David 112

Imaginables & XYZ Workshop Design Magenta, Gravity Defying, 3D Printed Trophies for DIA Graduates of the Year


3D Design 3D Printing 3d printed award 3d printed trophies 3d printed trophy australia Design Institute of Australia Imaginables xyz workshop3D printing is a winner all around as far as one of our most popular and contemporary technologies. With its accessibility and affordability come numerous and substantial benefits to users around the. View the entire article via our website.