RepRap: Blog: Join us at 2014 Midwest RepRap Festival (MRRF.

RepRap Blog

3D PRINTING CHALLENGES See some of the most difficult prints take shape over the course of the weekend, and some fun printing challenges too, like the hand-fed extruder print challenge. RepRap: Blog.

RepRap: Blog: Big RepRap Refereed Journal Article

RepRap Blog

It is, of course, a scholarly engineering article intended for academics. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Thursday, April 14, 2011. Big RepRap Refereed Journal Article. We have just published a paper in the journal Robotica about how RepRap started, its development, and how it has got to where it is now. But it is - we hope - also a good read for everyone.

Trending Sources

RepRap: Blog: RS Components distributing RepRaps

RepRap Blog

For more details see RSs blog post here , and, of course, their catalogue here. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Monday, December 02, 2013. RS Components distributing RepRaps.

RepRap: Blog: Rewriting history

RepRap Blog

Erik, of course, has done a superb job of estimating the World population of RepRaps together with RepRap-derived machines like MakerBots and 3D-Systems/BfBs. I, of course, replied that - like the other 7 billion of you - I didnt have a clue. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Monday, April 18, 2011. Rewriting history.

RepRap: Blog: Reprap Prusa Iteration 2 Build Event in Cologne.

RepRap Blog

Signup by email, kliment.yanev @ gmail.com Included in the course price are all the parts as well as some plastic print material. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Sunday, November 27, 2011.

RepRap: Blog: Quality - Open Source for the Win (Part Deux)

RepRap Blog

It took a while under those conditions, of course - 5 hours. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Tuesday, November 29, 2011. Quality - Open Source for the Win (Part Deux).

RepRap: Blog: Print any colour you like.

RepRap Blog

Of course the full design will be on the wiki as soon as we can get organized. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Tuesday, April 10, 2012. Print any colour you like. without added stripes.

RepRap: Blog: Announcing AMRI: Advanced Manufacturing.

RepRap Blog

As part of the mission of AMRI Rice, the Fellows will also take part in a 4-day Advances in Tissue Engineering Short Course where they will receive a 32-hr crash-course in all the very latest in tissue engineering research from thought leaders from around the world. RepRap: Blog.

RepRap: Blog: Surface-Oriented CAD, Math, & Telescopes

RepRap Blog

Some people may be most interested in the final section, in which I discuss my attempts to 3D print a telescope (designed with surfcad, of course) and the problems Im running into. RepRap: Blog.

RepRap: Blog: UK RepRap Master Class

RepRap Blog

For a fee of £575, participants will be provided with all of the hardware and software, along with expert guidance, over the course of the weekend, to build and commission their RepRap 3D printer. RepRap: Blog.

RepRap: Blog: Why is 3D printing such a powerful way to make solid.

RepRap Blog

You are absolutely right - rate of volume deposition is another dimension that needs to be controlled, as of course, are time and one or two temperatures. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer.

RepRap 113

RepRap: Blog: Balitmore RepRap Master Class

RepRap Blog

For a fee of $850, participants will be provided with all of the hardware and software, along with expert guidance, over the course of the weekend, to build and commission their RepRap 3D printer. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Sunday, May 22, 2011. Balitmore RepRap Master Class. If you’re thinking of getting into 3D printing and don’t know where to start, then we have just the ticket for you.

RepRap: Blog: Vapor Treating ABS RP parts

RepRap Blog

ideal of course is 2 one way valves of some form. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Tuesday, February 26, 2013. Vapor Treating ABS RP parts.

RepRap 114

Welcome to the 3DEXPERIENCE Certification Center

The Solidworks Blog

In 2006 we made the switch away from the in-person testing method and moved to an online testing platform called VirtualTester. Of course opening up the ability for SOLIDWORKS users to discover other products they might like to explore, but never knew about will be a benefit as well.

RepRap: Blog: Impartial reivew of the Clonedel Cast parts by Metrix.

RepRap Blog

And of course, while those look like they're plenty strong (with the flexibility, they might even be better than ABS), the cast parts only really need to last long enough to get the machine printing well enough to make its own spares. RepRap: Blog.

RepRap: Blog: New Extruder Design

RepRap Blog

Machined parts can take higher temperatures, of course. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Friday, April 22, 2011. New Extruder Design.

RepRap: Blog: Around the RepRap Community 11/28/2011

RepRap Blog

Of course this is the open source board upload by Jos to the RepRap Wiki. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Monday, November 28, 2011. Around the RepRap Community 11/28/2011. Credit Photo Tomcee. Hall-O effect Endstops.

RepRap: Blog: 0.01 Layer Height on a Prusa Mendel

RepRap Blog

After the failure of the Yoda I needed to find a model that looked nice in fine printing, and had no bridging, of course my mind went straight from Yoda to the naked female form. RepRap: Blog.

RAYLASE Announces White Paper on AM Process and Initial Details of Trade Fair Appearance

Additive Manufacturing

Of course we want to present our technologies with the AM-MODULE NEXT GEN and the SP-ICE-3 control card, but above all we want to provide answers to the important questions posed by machine manufacturers, OEM and integrators: What can RAYLASE do for me? Wessling, Germany, Tuesday, 23.

Makers, see you at the Maker Faire Paris

Sculpteo

This worldwide show, born in San Mateo in 2006, is coming to the French capital for the second time. Of course, we’ll be there too. Maker Faire is coming to Paris on the 2nd and 3rd of May.

RepRap: Blog: Print any colour you like.

RepRap Blog

Of course, molten polymer has a very high viscosity, so the Reynolds number of the flow in the nozzle is very low (and hence highly reversible). RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Tuesday, February 21, 2012.

The Engineering of Paralympic Sports Technology

The Solidworks Blog

Of course, when you swap the basketball court for the race track, speed matters more than strength. The challenge of course with an implant that breaks the skin is keeping the site free from infection. Here’s a question for you.

RepRap: Blog: Say goodby to thermistor table misery.

RepRap Blog

This code has to do some FP calculations of course (including logs and exponentials). RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Saturday, June 02, 2012. Say goodby to thermistor table misery. Tired of trying to remember which thermistor table to activate in your firmware? Heres some code that calculates temperatures analytically in exactly the way that Nopheads really useful createTemperatureLookup.py

Improving Natural Resources Worker Safety with the Virtual World

3D Perspectives

Take this statistic from IRSTT report “Estimating the Costs of Occupational Injuries” that found: “The annual cost of occupational injuries in Québec mines is estimated to be approximately $130 million dollars (in 2006) or about 5% of the mining industry’s contribution to Quebec’s GDP.”

RepRap: Blog: Around the RepRap Community 03/12/12

RepRap Blog

His software is of course free like speech, but he takes donations :). RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Monday, March 12, 2012. Around the RepRap Community 03/12/12. Marlin 1.0.

Designer Spotlight: Robert Krawczyk

Shapeways Blog

During my 31 years at IIT, I have developed and taught a series of computer-aided design and digital design courses covering 2D and 3D CAD, image composition, animation, and form generation methods.

RepRap: Blog: 3D/DC

RepRap Blog

Unfortunately, despite almost year of reliable service, my extruder (a Wades Extruder of course, something Im fairly proud of) chose that moment to jam up. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer.

RepRap: Blog: Automatic documentation and project evolution

RepRap Blog

Of course it can’t be fully automatic, but you will have at least hyperlocal assembly instructions, which would be structured and more easily recognized. You'll have dev access of course. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Wednesday, March 16, 2011. Automatic documentation and project evolution. While designing my Mendel, I found out that I really hate to write documentation.

SOLIDWORKS xDesign Challenge Submission – Greg Green

The Solidworks Blog

In 2006, I took a job as a robotics integration designer, which is where I was first exposed to SOLIDWORKS. Occasionally I do some fun things as well… (of course all in SOLIDWORKS!). The fifth person we would like to profile from the SOLIDWORKS World xDesign challenge is Greg Green.

RepRap: Blog: Conducting Plastic Experiments

RepRap Blog

filament, for which we dont care whether the particles touch or not, of course. My name is Amy and I'm a Materials Science Student from Univ of Pennsylvania and working with a group of 4 other students on a project where we're trying to print conductive materials from a Makerbot So far, we've had limited success testing conductive inks, paints, solders and we really could use your help in continuing with our best course of action. RepRap: Blog.

RepRap: Blog: Around the Community 03/25/12

RepRap Blog

Of course getting people to properly calibrate before using their magic machine is like pulling teeth! RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Sunday, March 25, 2012. Around the Community 03/25/12. Printrboard is now available ($130, $145 shipped to the US ). Printrbot has created their own all on board branch of the Teensylu.

JEC Americas 2014 in Partnership with CATIA – October 28, 29 in Boston

3D Perspectives

He was the recipient of the Top Gun Award at the 2006 CATIA Operators Exchange (COE) Annual Product Lifecycle Management Conference. Dear CATIA Composites Lovers, JEC Americas 2014 will take place in October 28th & 29th in Boston, with the participation of CATIA from Dassault Systèmes.

Boston 103

Ahoy! Captain SOLIDWORKS!

The Solidworks Blog

Plotting a Course From Drummer to Boat Captain . Barts in 2006 when he first had the idea for the Connected Boat. How Dan Harper Navigated his Unique Entrepreneurial Voyage from Boat Captain to Tech CEO with SOLIDWORKS. Captain Daniel A.

Spotlight on PHI Cubed: Guiding the AEC Industry Toward Greater Levels of Integration

3D Perspectives

The former architect and current building information consultant teaches a course on the Dassault Systèmes 3DEXPERIENCE platform at the University of Miami School of Architecture with the goal of increasing collaboration in all areas of the industry.

Miami 87

Is U.S. Manufacturing Really in Decline?

Design 2 Part News

And of course, it’s true. million from June 2006, and down 4.9 Of course, it’s natural to discuss direct employment when determining the state of manufacturing in a given country. By Daniel Gross, strategy+business. Did you hear that U.S.

Tektronix 8560 still going strong

HydraRaptor

It was replaced by two MicroVax es and later PCs of course. It is built like a tank, so of course it still powers up fine, asks if the time and date is still 2006 (the last time I powered it up) and if not suggests I enter a time and date with 1982 as an example.

Data 52

What is the Importance of a UL 2272 Certification?

3D Printing Hub

In 2006, Dell had to issue a highly talked about recall of millions of laptop batteries due to the same issue. Of course, almost everyone will remember how Samsung had to recall more than a million units of their Note 7 after reports poured in of the mobile devices catching fire while plugged in. The term “UL 2272 Certified” is probably familiar for anyone who has ever shopped or read reviews for electric scooters , hoverboards , or electric skateboards.

8 Things to Do at Maker Faire New York 2014 + Win Free Tickets!

i.materialise

Established in 2006, Maker Faire is a family-friendly festival celebrating the Maker Movement and DIY (“Do It Yourself”) work ethic. This crowd-pleaser features a drone flying competition full of aerial combat, obstacle courses and other UAV games.

Which is the Best DJI Drone? Best Options for Your Budget

3D Printing Hub

DJI is a Chinese technology enterprise founded in 2006 by a man called Frank Wang (W?ng The most notable are software upgrades, sensing abilities, and of course the high-quality camera. Drones are becoming so common in our skies now that folks barely glance up anymore.

Video 60