The Most Important 3D Printing Technologies & Materials You Need to Know

i.materialise

If you believe that all 3D printers use filaments, and terms like Stereolithography, Laser Sintering and PolyJet Printing cause you headaches, then this blog post is for you. Filament-based 3D Printing. ABS prints: Functional & strong but with a rough surface.

Continuous Fiber 3D Printing Technology (CF3D®) – Explained

Manufactur3D Mag

Continuous Fiber 3D Printing Technology (CF3D®) by Continuous Composites, offers a great composite 3D printing solution for a wide range of industries. The post Continuous Fiber 3D Printing Technology (CF3D®) – Explained appeared first on MANUFACTUR3D.

Spread of 3D printing technologies

Additively Blog

This statistic provides some insight into the spread of 3D printing technologies

3D Printing Technologies: Fused Deposition Modeling

i.materialise

Contrary to popular belief, there’s not a one-size-fits-all approach to 3D printing. Although we offer 17 different materials and over 90 possible color and finish combinations, it often takes us several different technologies to get the job done. In general, 3D printing technologies can be split up into 2 groups: direct and indirect 3D printing. FDM Printing Sizes. The Printing Size of ABS.

The Most Important 3D Printing Technologies & Materials You Need to Know

i.materialise

If you believe that all 3D printers use filaments, and terms like Stereolithography, Laser Sintering and PolyJet Printing cause you headaches, then this blog post is for you. In this post, we’ll give you an overview about the essential 3D printing technologies and 3D printing materials that are currently used on an industrial level. Filament-based 3D Printing. After the printing process, the model is put into a bath with special soap.

Harnessing 3D Printing Technology for Business

3D Innovations

It’s no secret that additive manufacturing, commonly referred to as 3D printing, is transforming the business landscape. 3D printing technology allows designers to quickly, easily and efficiently design and produce a product prototype for review within hours, instead of weeks.

4 Ways Ceramic 3D Printing Technologies Are Paving the Way for the Future

3DPrint.com

Ceramic 3D printing has always been a popular application of additive manufacturing, yet still on the relative margins when compared to thermoplastics or metals.

New Stereolitography Resin-based 3D Printing Technology

DIY 3D Printing

Researchers at UC Berkeley and Lawrence Livermore National Laboratory invented a new resin based 3D printer, which they nicknamed "replicator". new diy 3d printer resin science stereolithographyIt sure looks cool.

Exploring 3D Printing Technology for Business

3D Innovations

3D Printing is a topic that quickly captures your interest and your imagination. The idea of seemingly “printing” an object out of thin air is something that feels like it is straight out of a sci-fi movie. 3D Printing: Competitive Advantage of the Technology.

3D printing technology: SLA vs SLS

Sculpteo

The post 3D printing technology: SLA vs SLS appeared first on 3D Printing Blog: Tutorials, News, Trends and Resources | Sculpteo At Sculpteo we are often asked: what is the difference […].

Cold Spray 3D Printing Technology Could Revolutionize Submarine Repairs

3DPrint.com

3D Printing Additive Manufacturing Maritime 3D Printing Metal 3D Printing 3d printing maintenance ASC australia cold spray additive manufacturing Collins Class Submarine csiro Department of Defence DMTC Limited Royal Australian Navy submarineAustralia’s geographical remoteness, lengthy coastlines, and vast maritime jurisdiction historically led the country to rely on its maritime industry, which includes oil and gas extraction and.

XJet at formnext: Focus Now is on the Materials for NanoParticle Jetting 3D Printing Technology

3DPrint.com

About a year ago, we first heard about Israel-based XJet, which promised to take metal additive manufacturing technology in a wholly new direction with inkjet printing. Since their emergence as a. View the entire article via our website.

Do3D Develops Revolutionary Multi-side “MAP” 3D Printing Technology

3DPrint.com

For Martos Barton and the guys behind Budapest-based Do3D Innovations, the work on the professional level Genesis (G1) DLP 3D printer last year was only the beginning: they have now set out to. 3D Printers 3D Printing 3d printer 3d printing technologies 3d printing technology Budapest Do3D map multidirectional

3D Printing Technology Transforming the Automotive and Aerospace Industry

BIS Research

With the first attempt at developing a rapid prototyping technique in 1980, 3D printing technology has come a long way. 3D printing is a tool for designing and creating innovative and unique prototypes of objects in a shorter span of time. The establishment of 3D printing is contributing significantly to the manufacturing industry and has resulted in the growth of related service providers.

Conjoined Twins Will be Separated With the Help of 3D Printing Technology

3D Printer

To help plan out the first surgery of its kind at the hospital, the medical team is using 3D printing technology to aid in their preparation of the complex separation, according to the Chinese News Service. On June 9, a pair of little girls literally joined at the hip will be separated at a Chinese hospital. The girls, who were born in March, pose an unprecedented challenge to the team at Children’s Hospital of Fudan University in Shanghai.

Top European Orthodontic Aligner Brand Using Structo's Dental 3D Printing Technology

3DPrint.com

3D printer manufacturer Structo, headquartered in Singapore, designs, develops, and manufactures 3D printers tailored for dental applications, like the flagship OrthoForm, which are powered by its. 3D Printing Medical 3D Printing 3d printed models 3D printed orthodontic aligners clear aligner molds ClearCaps DentaForm dental 3d printers dental 3d printing MSLA MSLA 3D printing technology orthodontic aligners structo Structo 3D

Desktop Metal granted seminal Separable Supports patents for its metal 3D printing technology

Experience Matters

Desktop Metal announced today it has been granted seminal patents by the United States Patent and Trademark Office for its Separable Supports technology which enables 3D printing of large, complex parts through metal sintering and the removal of metal support structures by hand. 3D Printing Technology

Plastic 3D printing technologies: HP Multi Jet Fusion vs SLS

Sculpteo

According to our 2017 study The State of 3D printing, p […]. The post Plastic 3D printing technologies: HP Multi Jet Fusion vs SLS appeared first on 3D Printing Blog: Tutorials, News, Trends and Resources | Sculpteo. 3D Printing technologies 3D printing technologies HP black plastic HP multi jet fusion Multi Jet Fusion PA12 plastic SLS SLS plastic

YouMagine Announces Radical Contest for Innovators with the ‘Develop a New 3D Printing Technology Challenge’

3DPrint.com

I’ve been wracking my brain to come up with an idea for the YouMagine Develop a New 3D Printing Technology Challenge and soon you will be too, as this contest asks you not to create... View the entire article via our website. 3D Design 3D Printing 3D Printing Challenge 3d printing contest 3D Printing Technology Challenge challenge design challenge Develop a New 3D Printing Technology Challenge ultimaker original youmagine

Rapidly Producing Nasal Swabs Using 3D Printing Technology

Shapeways Blog

Using 3D printing technology and its ability to manufacture rapidly, Shapeways has partnered with EnvisionTEC to produce 3D printed nasal swabs in its FDA-approved facility in Long Island City, New York. 3D printing allows these swabs to be made to precise specifications. During the COVID-19 pandemic, 3D printed nasal swabs are able to fill in the supply shortages quickly and reliably.

Why 2017 Will Be the Breakout Year for 3D Printing Technologies

3D Printing Review

You are likely sitting here having finished reading numerous articles from 3DPrint.com and other news sources over the course of the last several months, thinking to yourself, “This crazy technology is progressing so fast that it’s almost scary.” Let’s have a look at what they are: HP Enters With Multi Jet Fusion Technology. Although 2016 will be the year of their launch, it won’t be until around the middle of 2017 when the technology really begins showing its face.

Divide by Zero Technologies Introduces APFM, the First Patented 3D Printing Technology to Come from India

3DPrint.com

However, India’s Divide by Zero Technologies is the exception to the rule. 3D Printers 3D Printing Business Science & Technology 3D printed functional prototypes 3d printing technologies Advanced Plastic Fusion Modeling Aion 3D printers Aion 500 Aion 500 MK2 APFM Divide by Zero Technologies

India 86

XJet to Showcase NanoParticle Jetting Metal 3D Printing Technology at formnext

3DPrint.com

In two weeks, 3DPrint.com will be at formnext, alongside hundreds of exhibitors and thousands of visitors, to see and experience some of the latest additive manufacturing technologies in person. 3D Printers 3D Printing Business Metal 3D Printing formnext formnext 2016 NanoParticle Jetting NanoParticle Jetting metal 3D printing nanoparticles Xjet XJet 3D printing technology XJet NanoParticle Jetting technology

Metal 87

Azul 3D Raises $12.5 Million for Large, Fast HARP 3D Printing Technology

3DPrint.com

Azul 3D, known for its ongoing development of high area rapid printing (HARP) technology, is certainly not lacking in financial resources—or faith from investors.

10 Disadvantages of 3D Printing Technology

3D Printing Hub

As with any emerging technology, 3D printing has disrupted the markets by transforming product development. Also known as additive manufacturing, 3D printing involves joining materials together, layer after layer to make objects from a 3D digital model. The 3D printing process eliminates many steps used in traditional manufacturing and facilitates the manufacture of complex structural components. 3D Printing Technology is Expensive.

All You Need to Know About 3D Printing Technologies

i.materialise

If you believe that all 3D printers use filaments, and terms like Stereolithography, Laser Sintering and PolyJet Printing cause you headaches, then this blog post is for you. In this post, we’ll give you an overview about the essential 3D printing technologies that are currently used on an industrial level. Filament-based 3D Printing. The technology behind this is often referred to as “Fused Filament Fabrication” (FFF).

The History of 3D Printing: 3D Printing Technologies from the 80s to Today

Sculpteo

3D printing is not as new as you may think! The post The History of 3D Printing: 3D Printing Technologies from the 80s to Today appeared first on 3D Printing Blog: Tutorials, News, Trends and Resources | Sculpteo. Innovation & Business strategy 3D Printing historyActually, F […].

PhD Student Uses HP 3D Printing Technology to Help Rehabilitate Spinal-Cord Injury Patients

Additive Manufacturing

The device is made using the HP Multi Jet Fusion (MJF) 4200 3D printer, in conjunction with Autodesk Fusion 360’s Generative Design software, and is designed to specifically help restore hand function.

Learn More About HP's Multi Jet Fusion 3D Printing Technology in Free Webcast

3DPrint.com

It can be hard to keep up with all of the advancements in 3D printing, as they happen at such a rapid rate. There are so many different 3D printing technologies now that keeping track of them all. 3D Printing Education Sponsored 3D printing online seminar 3D printing webinar 3DPrint.com webinar 3DPrint.com webinars Dr. Stephen Rudisill free webinar hp HP Multi Jet Fusion MJF Multi Jet Fusion 3D printing technology webcast webinar

Boeing and Thermwood Partnership to Demonstrate New 3D Printing Technology

Additive Manufacturing

Boeing and Thermwood Corporation have employed additive manufacturing technology to produce a large, single-piece tool for the 777X program. The tool was printed as a single piece from 20% carbon fiber reinforced ABS using the Vertical Layer Print system.

WACKER Announces New Silicone 3D Printing Technology

3DPrint.com

While several companies have developed 3D printing materials and processes with similar properties capable of simulating silicone, so far 3D printing with actual silicone materials hasn’t been possible. However, 100 year old chemical manufacturing... View the entire article via our website.

BMW Celebrates 25 Years of Using 3D Printing Technology to Build Cars

3DPrint.com

3D printing is rapidly becoming one of the fastest adopted manufacturing and prototyping technologies throughout the automotive industry. 3D Design 3D Printing Business 3d printed automotive applications 3D printed automotive components 3D printed car assembly tools 3d printed car parts 3D printed cars automotive applications BMW bmw 3d printing bmw concept car BMW i BMW Rapid Technologies Center CLIP 3d printing technology custom 3d printed car parts

YouMagine Selects Winners of Contest to Create a New 3D Printing Technology

3DPrint.com

YouMagine, a community of makers who help people remix, share, and learn by making 3D printed items, say they’ve decided on a winning entry for their “Develop a New 3D Printing Technology Challenge.” 3D Printers 3D Printing 3D Printing Materials 3d print design winners 3D Printing Challenge 3D Printing Technology Challenge dual extruder Laird Popkin silicone 3d printing ultimaker 3d printers XYZAidan youmagine

Free 3DPrint.com Webinar Available for Those Interested in Learning More About HP's MJF 3D Printing Technology

3DPrint.com

first announced its breakthrough Multi Jet Fusion (MJF) 3D printing technology in 2014 until it was finally introduced last spring, the industry has been extremely. 3D Printing Education Sponsored 3d print materials 3d printing and voxels 3D printing online seminar 3D printing webinar 3DPrint.com webinar 3DPrint.com webinars Dr. Stephen Rudisill free webinar hp HP Multi Jet Fusion MJF Multi Jet Fusion 3D printing technology webcast webinar

Coobx Arrives With the Exigo 3D Printer, Featuring Patent-Pending LIFT 3D Printing Technology

3DPrint.com

Most people, if they’re familiar with 3D printing at all, know at least something about the most common 3D printing technologies: FDM, SLS, DMLS, etc. 3D Printers 3D Printing Carbon Coobx Exigo LIFE zone lift LIFT 3D printing technology Light Initiated Fabrication Technology resin 3D printers resin 3d printing

Ampower Releases Paper Discussing Sinter-Based 3D Printing Technologies

3DPrint.com

The German company offers its expertise on all things 3D printing-related in order to. 3D Printing Metal 3D Printing Ampower Binder Jetting laser beam powder bed fusion metal FDM sinter-based 3D printingAmpower is an aptly named company, as its goal is to empower companies to benefit from additive manufacturing. View the entire article via our website.

Xaar: Open Printheads for Developing Inkjet 3D Printing Technologies

3DPrint.com

3D Printing 3d printing high speed hss inkjet printhead substrate XaarXaar is a Cambridge based company that makes many different kinds of inkjet head. It is also has invested in High Speed Sintering (HSS), the Factum machine both pioneered by Neil Hopkinson to. View the entire article via our website.

The Transformation of 3D Printing Technology

3D Innovations

Less than ten years ago, the hype surround 3D printing technology was at an all-time high. There were far too many barriers for the technology to overcome, both technological and usability, before it could be in “everyone’s house”. Over time the hype slowly diminished, and the technology began to steadily mature. Firms focused on 3D printing began to collaborate, merge and narrow their focus. Industrial 3D Printing.

Types of 3D Printing Technologies

In'Tech Industies

No matter how realistic and high-quality a 2D print is, you simply cannot run your fingers over its surface, or feel its contours and heft. 3D printing provides an easy solution. What is 3D printing? Simply put, 3D printing is a prototyping technology which creates a real object from 3D design data. The data is fed to a printer which prints out the design layer by layer to create the object.

Advancments in 3D Printing Technology for Orthopaedic Care

3D Printing Progress

It is no secret that technology is transforming the healthcare industry at rapid speed.

Will HP’s 3D Printing Technology Revolutionize the Industry?

3D Printing Review

HP has a bold vision for 3D printing in which organizations and individuals will manufacture rugged parts on a machine costing under $100,000. Its 3D printer harnessing Multi Jet Fusion will print with amazing speed. In this vision, the capability to rapidly manufacture mechanically robust parts on a sub-$100k 3D printer will undoubtedly herald an industrial revolution. Industrial printers using SLS technology will always be an expensive proposition.

3D Printing Technologies: SLS & SLA

Sculpteo

The post 3D Printing Technologies: SLS & SLA appeared first on Sculpteo Blog - 3D Printing News and Trends At Sculpteo we receive the question what’s the di […].

3D Printing Technology Shines at the Olympics

3D Innovations

The US Luge Team tapped 3D printing (also known as additive manufacturing) technology for the XXIII Winter Olympic Games in Pyeongchang, South Korea. However, this is not the first time that 3D printing technology has made an appearance at the Olympic Games. In a matter of days, they were able to design, print, and test prototype sled designs, which would normally take weeks or months using their existing processes.