Flying Can be Fun with Zenith Aircraft Company

The Solidworks Blog

For Zenith Aircraft Company , excitement is the journey and not just the destination. When most people think of flying, it’s for transportation purposes and not for a joy ride; this is especially true when you fly commercial,” said Sebastien Heintz, founder of Zenith Aircraft Company. “On

Swiss dental company Straumann seeks 3D printing partner


Straumann, a dental solutions company based in Basel, Switzerland, has announced it is seeking an official 3D printing partner. 3D Printer CompanyThe Straumann Group is one of the world’s leading providers of dental implants, restorative products, and services.

Trending Sources

SD3D acquires 3D printing automation software company Printelize


It’s been a busy week in terms of company reappointments, acquisitions, and partnerships in the 3D printing industry. Now, San Diego-based automation and 3D printing company SD3D has announced it has completed the acquisition of Polish software company Printelize.

3D printing company Prodways raises over €50M with IPO launch on Euronext Paris


Prodways Group (PWG), the France-based industrial 3D printing company, has announced that its recent IPO listing was a huge success. The company, which recently went public on the Euronext Paris securities exchange, reportedly raised €50.7 3D Printer Companymillion after the full exercise of the Extension Clause and before the exercise of the Over-allotment Option. The amount has the potential of raising up to €66 million if the Over-allotment Option is exercised.

Metal 3D printing company BeAM aiming to become industry leader


Founded in 2012 near Strasbourg, France, BeAM has become a promising force within the field of metal 3D printing, also known as additive manufacturing.The young company, which in 2015 generated a turnaround of 1.25 3D Printing Company

Oerlikon acquires German metal 3D printing company citim


With the acquisition of metal additive manufacturing company citim, Oerlikon has a particular plan in mind: to make itself into an independent service provider for 3D printed components, with all steps in the additive manufacturing process offered from a single source. 3D Printer Company

3D printing company SLM Solutions announces immediate removal of CEO Markus Rechlin


German 3D printing company SLM Solutions has removed Markus Rechlin from his position as CEO and management board member and appointed Uwe Boegershausen, the company's chief financial officer, as acting CEO. 3D Printer Company

SLM 34

Robotics company ABB acquires Spanish 3D scanning innovator NUB3D


Pioneering Swedish-Swiss technology leader ABB is the latest company to join the 3D technology revolution, announcing today that it has acquired 3D scanning company NUB3D.

Dutch companies unite in RAMLAB to facilitate 3D printing progress, eyeing welding 3D printer


Many people have wondered why the very promising 3D printing industry hasn’t been more successful in drawing in established companies from various manufacturing sectors. 3D Printing Company

Dutch 3D printer company Nectar receives €1M investment to expand production of Nectar One


Dutch 3D printer manufacturer Nectar has announced that it has received a one million euro investment from Dutch investment company TIIN Capital and venture capital firm PPM Oost. 3D Printer CompanyThe funding will allow the Arnhem-based 3D printer developer to increase its production, sales, marketing, and R&D for its upcoming Nectar One 3D printer.

Is MakerBot close to the brink? Stratasys-owned 3D printer company lays off 30% of workforce


Not according to the New York-based company itself, but that won’t stop the question being asked, with a growing degree of seriousness, by all in the 3D printing industry. 3D Printer Company

3D printing construction company Apis Cor prints 37 m2 house near Moscow, plans global expansion


Apis Cor, an additive manufacturing construction company based in San Francisco and the Russian cities of Moscow and Irkutsk, has used its own construction 3D printer to build a 3D printed house in Stupino, near Moscow.

Cypriot 3D printer company Ilios returns with new Photon 2 UV DLP 3D printer


The company’s founder, Demetris Zavorotnitsienko, attributed the closure to a lack of funds and operational difficulties. 3D Printer CompanyJust before the new year, we reported that Cyprus-based 3D printer developer Ilios was regrettably closing its doors.

Metal 3D printing company Atlantic Precision Inc. bought by Precision Castparts Corp.


Florida-based metal 3D printing company Atlantic Precision Inc. 3D Printing Companyhas been bought by Precision Castparts Corp., an Oregon-based diversified manufacturer of complex metal components and products. Previous owner Generation Growth Capital Inc.

3D Systems President and CEO Avi Reichental steps down; Company shares drop 7 percent


As a company that has experienced its share of highs and lows (with arguably more lows in the recent past, including steadily declining shares and losing an $11 million arbitration this week), 3D Systems today announced the departure of President and CEO for the past 12 years, Avi Reichental.

MakerBot co-founder Bre Pettis acquires rapid prototype tooling company Other Machine Co.


Bre Pettis, the co-founder and former CEO of 3D printing company MakerBot, has reportedly acquired Other Machine Co., 3D Printer Companya manufacturer of rapid tooling and milling machines based in Berkeley, California.

3D Systems acquires dental 3D printing materials company Vertex-Global Holding


a dental materials company that supplies products under the Vertex and NextDent brands. 3D Printer Company3D Systems has announced the acquisition of Vertex-Global Holding B.V.,

Chinese company prints villa on-site

3D Printing Industry

Hushang Tengda has 3D printed a 400 square meter luxury villa, on site, in just 45 days. Construction is a huge deal in the 3D printing. 3D Printers construction Housing

3D printer company Prusa has over $1M in funding blocked, issues warning about PayPal


Czech Republic-based 3D printer developer Prusa Printers published a warning to other small but quickly growing businesses after online payment company PayPal froze over $1 million of its funding. 3D Printing Company

3D printing company Nano Dimension raises $4M through private placement, releases Q1 results


an Israeli company that specializes in 3D printed electronics, has just announced that it has raised a total of NIS 14.4 At the same time, the company has also released its 2017 first quarter financial results. 3D Printer CompanyNano Dimension Ltd.,

Oceanz becomes first 3D printing company to receive ISO 13485 certificate for 3D printed medical devices


It’s therefore great news that Dutch medical 3D printing specialists Oceanz has just become the first 3D printing company to be awarded the ISO 13485-certificate from the EU, paving the way for medical 3D printing on a large scale. 3D Printing Company

Reports: Disney acquires worlds first 3D printed toy company MakieLab


MakieLab, a UK-based company that had made custom 3D printed dolls since 2012, has reportedly been acquired by Disney. 3D Printer CompanyMakieLab has history with the US entertainment giant, having been part of the Disney Accelerator startup scheme in 2015.

3D printer company Mcor Technologies seeks investment for huge expansion as it triples its workforce


The company, based in Dunleer, Ireland, was founded back in 2005 by brothers Conor and Fintan MacCormack. 3D Printer Company3D innovator Mcor Technologies is contributing again to the unstoppable growth of the 3D printing world as it expands its workforce from 50 to 150.


European Investment Bank pumps €15 million into Dutch 3d printer company Ultimaker


3D Printer CompanyBig things are happening over in the Dutch HQ of Ultimaker in Geldermalsen. The desktop 3D printing pioneer has just received a 15 million euro loan from the Luxemburg-based European Investment Bank (EIB). The funds will mostly be used to facilitate research projects and to bridge the gap until an even larger seed round that is scheduled for mid-2017. Ultimaker, it seems, is looking to take over the desktop 3D printing world.

Promoting Your Company with the Help of SOLIDWORKS

The Solidworks Blog

The benefit to SOLIDWORKS is the association with world-class companies. Here’s how Knapheide Manufacturing Company benefited: “We have had a lot of success with our partnership with SOLIDWORKS.

Swedish company OssDsign receives FDA clearance for 3D printed cranial implants


The FDA clearance means that the Uppsala-based company’s 3D printed cranial implants can now be marketed and sold within the United States. OssDsign, the Swedish manufacturer of next-gen 3D printed cranial and facial implants, recently announced it received 510(k) clearance from the U.S.

The Digitalization Opportunity for Medical Device Companies (video)

Tech Clarity

Medical Device companies have the opportunity to leverage digitalization and the digital enterprise to develop innovative products and bring them to market quickly. read more » The post The Digitalization Opportunity for Medical Device Companies (video) appeared first on Tech-Clarity.

3D printed prosthetics company UNYQ expands, opens new office in Charlotte, NC


3D printed prosthetics company UNYQ, which has up until now operated primarily from its offices in San Francisco and Spain, has decided to expand its business to the U.S.

WinSun founder says company could 3D print Trump wall for 60% of projected cost


WinSun founder and chairman Ma Yihe has been quoted as saying his company could feasibly build Donald Trump’s infamous border wall both cheaply and quickly using its construction 3D printing technology. Whether he was making a serious proposition or not, it’s clear that Ma Yihe thinks his company’s 3D printing tech would be up to the task.

11 Companies Leading the 3D Bioprinting Space

Using layer-by-layer fabrication methods, a number of companies are in the process of pushing forward a new paradigm... View the entire article via our website. Undoubtedly one of the most exciting areas within the 3D printing space is that of bioprinting.

Chinese Company 3D Prints An Entire Engine

If there was one 3D printer manufacturer in China who has really taken its technology to grand heights, it would probably be a company called Winbo Smart Tech Co.,Ltd. Not only do they manufacture... View the entire article via our website. 3D Design 3D Printing 3d printed engine 3D printed motor dragone (s) engine winbo

Astonishing Morgan Motor Company SP1 Car was Construced with 3D Printed Parts

Dating back to 1909, family-owned British automobile manufacturer Morgan Motor Company has been hand building high quality, highly sought-after cars for customers in Europe and all over the globe. 3D Design 3D Printing 3D printed cars 3D Printshow 3d printshow london 2015 morgan motor company morgan motor company sp1 sp1 sp1 car special project 1 stratasys uk

GE plans to invest $1.4B to acquire additive manufacturing companies Arcam and SLM


GE (NYSE:GE), the world’s leading digital industrial company, today announced plans to acquire two suppliers of additive manufacturing equipment, Arcam AB and SLM Solutions Group AG for $1.4 Both companies will report into David Joyce, President & CEO of GE Aviation.

Arcam 27

Spanish jewelry equipment company unveils new UVital DLP 3D printer


Barcelona-based jewelry equipment supplier Hispana De Maquinaria has introduced the UVital DLP 3D printing system.

GrabCAD Print: How It Can Make Your Company More Productive

Modern Tech

In this blog, we outline the new GrabCAD Print features and how they can make your company more productive. Managing CAD files can be a headache — especially if you don’t have a way to share them with your partners.

The 10 most influential companies and executives in 3D printing


The 3D printing market is maturing rapidly, "as attention and influence shifts from the companies that manufacture these amazing devices to a broad range of industries where the technology is finding distribution and practical applications".

Autodesk announces $100 Million Investment Fund for 3D printing companies


Autodesk has announced that it intends to invest up to $100 million in 3D printing companies over the next several years. This article Autodesk announces $100 Million Investment Fund for 3D printing companies is first published at