Authorities Seize 3D Printed Assault Rifle From Two Oregon Felons

3D Design 3D Printing 3d print a gun 3d printed firearm 3d printed gun ar-15 convicted felon guns oregonA lot can be said of gun laws, as there is a never-ending debate over the rules which should be put in place to either allow or restrict individuals from purchasing firearms. Regardless of... View the entire article via our website.

MakerBot: The Oregon Pint Runneth Over

Additive Manufacturing

The Kickstarter community thought so too: North Drinkware’s Oregon Pint reached its $15,000 target in five hours and fifteen minutes, and the campaign went on to raise more than $500,000 by the time it closed in March 2015. By Nicole Caputo, MakerBot Stories.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Trending Sources

Tesseract Design’s 3D Printed Mini-Headphones For Pets: When Guinea Pigs Need to Rock!

Oregon’s Tesseract Design is one of those companies that is obviously confident in their abilities both to encourage and foster tackling challenging projects with their clients, and then go right to the drawing board — or... View the entire article via our website. 3D Design 3D Printing 3d printed headphones animals commercial headphones oregon pets Tesseract Design

Competitors explore how to create a perfect 3D printed heat sink

3D Printing Industry

and Ireland recently gathered at the 18th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, in Las Vegas, Nevada, to innovate the design of heat sinks using 3D printing. Academics from the U.S

One Stay-At-Home Mom’s Piping Hot 3D Printed Cookie Cutter Business

One stay-at-home mom in Bend, Oregon, decided to make the most of her time and 3D design skills, and started her own 3D printed cookie cutter company. 3D Design 3D Printing 3d printed cookie cutters 3d printing Athey Moravetz cookie cutters doctor who game of thrones geeky my little pony oregon WarpZone Warpzone Prints LLC

Building in the Stars: Phase Two, Level Two Winners Announced for NASA's 3D Printed Habitat Challenge

3D Design 3D Printing 3d design challenge 3d printed construction 3d printed habitat 3D Printed Habitat Challenge 3D Printing Challenge 3d printing nasa 3d printing recycle Bradley University branch technology Foster + Partners nasa nasa 3d print NASA 3D Printed Habitat Challenge nasa 3d printing nasa challenge nasa space habitat challenge Oregon State University recycle 3d print space recycle 3d printing south korea thermoplastics

Researchers Use 3D Printing to Learn How Orchids are Tricking Insects

3D Design 3D Printing 3d printed artificial flowers 3d printed flowers 3d printed orchids evolution flowers Magpie Studio Melinda Barnadas orchids Tobias Policha University of OregonMost garden centers, and some grocery stores, carry potted orchids that are advertised as being the easiest plant in the world to care for. All you have to do is drop a few ice cubes in the pot once. View the entire article via our website.

OSU-Methodology Could Lead to More Sustainable Manufacturing Systems

Additive Manufacturing

by David Stauth | Oregon State University. It outlines a way to help designers and manufacturing engineers carefully consider all the ramifications of their design decisions, and to evaluate the possible different ways that a product could be built – before it ever hits the assembly line.

Design of the Week: Crater Lake


3D printed and highly finished version of Oregon's Crater Lake. » designThis week’s selection is the brilliantly. Read the whole entry. »

OSU Researchers Discuss Sustainability in Additive Manufacturing and New Sustainable Development Methodology

Additive Manufacturing

Researchers at Oregon State University ( OSU ) have developed a new “sustainable development methodology” to help designers and engineers evaluate product and process sustainability factors during the design process. About Oregon State University. Oregon State University.

3D Hubs Rings in the New Year: Events in Bend, Melbourne, Breda, and Paris

3D Design 3D Printers 3D Printing 3D Printing Materials 3d hubs 3d hubs events australia cults fab lab breda FabLab Breda footscray maker lab france High Desert Maker Mill hugo fromont melbourne Netherlands nicolas grimmer oregon Paris pierre ayroles sculpteoIt’s that time of the week to update our readers on 3D printing events sponsored by 3D Hubs. The holidays have passed, and whether you took time off from your 3D printing hobby or job, or took.

3D Printing News Briefs: April 28, 2017

In this week’s second edition of 3D Printing News Briefs, we’ve got information about the latest partnerships in the additive manufacturing business world, a company launching a new. View the entire article via our website.

Arcam 52

Designer Spotlight: Lucas Goossens

Shapeways Blog

Today’s Designer Spotlight focuses on model Lucas Goossens , fresh off the Fashion Week circuit and his feature in the New York Times , he also finds time to indulge his passion for positivity with his jewelry collection. What’s the story behind your designs?

XponentialWorks and Arcimoto create 3D printed suspension for Fun Utility Vehicle

3D Printing Industry

XponentialWorks, a combination of venture fund, advisory firm and product developer, has partnered with Arcimoto, an Oregon-based transportation innovator, to produce 3D print lightweight suspension components for Arcimoto’s Fun Utility Vehicle (FUV).

The Cube and School Projects

Cubify 3D Printing Fans & Fun

But, when my own granddaughter informed me that she needed some things that represented Oregon, we cast the paper mache idea aside as too messy and went straight to the RapMan instead. What we came up with was something to honor the Oregon Trail.

Designer Spotlight: David Ambrose

Shapeways Blog

For this weeks designer spotlight, we are featuring David Ambrose, designer behind Studio Darose. I have a wide education background, but fell in love with design and building. What’s the story behind your designs? How did you learn how to design in 3D?

David 81

Designer Spotlight on Josh Azevedo: From Humble Beginnings to Running a Top 3D Design Business


3D Business owner Josh Azevedo entered the world of 3D design by accident or more specifically, by marriage. Azevedo started as an animation graduate with an unsteady future, but now has his own 3D Design business: Do you know a 3D designer we should feature?

Portland Keeps it Weird with Their Life Sized 3D Printed Cow

The unofficial motto of Portland, Oregon proudly states “Keep Portland Weird”, and as someone who visits the city regularly, those are not empty words. 3D Design 3D Printing 3d printed cow keeping it weird large 3d print pdx 3d portland cow urban farmerBeing weird, or alternately different and fun, for many Portland... View the entire article via our website.

Arcimoto Pure Electric Fun Utility Vehicle Lightweighted Using XponentialWorks Generative Design and Additive Manufacturing Capabilities

Additive Manufacturing

The lightweighted designs were made using artificial intelligence and computer generated design by ParaMatters. The AI can explore nearly infinite design permutations based on the design concept, and provide an optimal solution to lightweight parts.

Keeping Weed Away From Kids: Green Technology Solutions Developing 3D Printed Child-Proof Cannabis Container

Whatever nicknames users give their often beloved marijuana, legal now both medically and recreationally in Colorado, Oregon, and Washington, the fact remains that. 3D Design 3D Printing 3D printed cannabis container 3D printed childproofing 3D printed pot device 6th Dimension Technologies Green Technology Solutions marijuana medical marijuanaMary Jane.

Geek Mom 3D Prints the Nerdy Cookie Cutters of Your Dreams

3D Printing Industry

The Oregon mom loved the idea of being home with her children, but her kids still need to eat, so a home-based business was the obvious solution.… 3D Printing Design Entertainment Industry news Makers By Scott J Grunewald.

Oregon 114

Laika Used 3D Printing to Create a 16-Foot-Tall Skeleton Puppet for Stop Motion Film ‘Kubo and The Two Strings’

Portland, Oregon-based animation studio Laika has made some of the most critically acclaimed stop motion animated films in the last few years. 3D Design 3D printed art 3D Printing 3D printed puppet 3d printed stop motion 3d printed Stop Motion animation 3d printing for film Cartoon Brew Coraline film props Hall of Bones Kubo and The Two Strings Laika Laika studio Paranorman Steve Emerson stop motion animation stop motion film stop motion puppets The BoxTrolls

New Home of Digital Manufacturing and Design Innovation Institute

RPM Tools

The DMDI Institute will address the life cycle of digital data interchanged through design, engineering and manufacturing. President Obama announced yesterday the selection of an Illinois consortium led by UI Labs, a nonprofit research and development group led by the University of Illinois, to lead the Digital Manufacturing and Design Innovation Institute (DMDI).

What engineers wanted to know about additive manufacturing in 2017

Leslie's Blog

But readers also had time for a little bit of fun and checked out what 3D printing can do to the design of cars. Carbon’s capabilities will enable designers to obtain specific properties in specific parts of their designs. slashes design cycle time.

Portland Community College MakerLab Holds H800 in High Esteem


He lives half time in Portland and half time in Eugene, where he also works at the University of Oregon MakerSpace and is finishing his degree in product design. Ouimet started 3D printing while pursuing a degree in product design at the University of Oregon.

Solid: the highly innovative 3D printed titanium bike

Top 4 3D Printing

The Bike Design Project is a competition currently running across the United States with the goal of finding the bicycle of tomorrow. Each team is made up of a high level design firm and an American bike craftsman.

Vintage Porsche Restoration Using 3D Systems' Geomagic and Quickparts

3D Systems

Vintage Porsche Restoration Using 3D Systems' Geomagic and Quickparts Thursday, March 5, 2015 - 13:37 The family owned and operated Emory Motorsports out of Oregon and California has Porsche restoration in its blood.

The Rubik’s Cube Gets A Speedy Upgrade With 3D Printing

Stratasys Blog for a 3D World

Every year, the Extreme Redesign Challenge calls upon tomorrow’s engineers, artists and entrepreneurs to design a better future. It is a test to see who can come up with the most creative, mechanically sound, and realistically achievable design using 3D printing.

Zahner Works – Emerson College at Los Angeles

3D Perspectives

Emerson College LA is designed by Morphosis with a series of custom facade systems design-engineered, manufactured, and installed by Zahner. The innovative design by the esteemed architects at Morphosis provides an integrated and efficient experience for both visitors and students.

Stratasys Delivers the “Missing Link” for LAIKA Studios

Stratasys Blog for a 3D World

Based in Portland, Oregon, LAIKA is an award-winning production company behind such Hollywood films as “Coraline”, “Kubo and the Two Strings”, and “Paranorman”. The J750 is perfectly designed for these film-makers – with true, full-color capability, texture-mapping and color gradients. We like saying our customers can “Make it with Stratasys” – tapping into the power of 3D printing to turn great ideas into innovation and success.

USF and nScrypt Show How 3D Printed Circuit Structures Can Replace PCBs

Additive Manufacturing

Combining 3D printing and printed electronics, the team designed a unique structural build with printed electronics materials as part of the structure, or housing. nScrypt Cyberfacturing Center is our direct digital contract design and manufacturing service.

Recently in…Transportation

The Solidworks Blog

This week, the “ Dream Cars: Innovative Design, Visionary Ideas ” exhibit debuted at the High Museum of Art in Atlanta, Georgia. Dedicated to the “dream big” history of concept cars, the collection connects us with the innovative designs responsible for our love affair with the open road.

An Expert in Growing Plants – and Business – with Help from 3D Printing


Jason Rider is the Founder of Thriving Systems Design, LLC and inventor of the C-Bite Stake Coupling and Anchor System. I don’t have a design background, but the Afinia software is easy to use. Once I got the design to a certain point, I took it to a company for manufacturing.

How to Fix NYC’s Subway Signal Woes

Shapeways Blog

And then some of them were produced at Shapeways in plastic, and then I got a company out in Oregon, I think, that make me molds so I can produce them in brass. Subway cars are designed two different companies: One is called MTH RailKing.

Stack Metallurgical Group Augments Hot Isostatic Pressing Capacity with Second System from Quintus Technologies

Additive Manufacturing

The improved material properties are essential for parts designed for demanding applications–in aerospace, medical implants, and power generation, for example. Combination of large and mid-sized HIPs advances Stack’s objective of one-stop shop thermal processing.

HP Opens New 150,000 Square Foot 3D Printing and Digital Manufacturing Center of Excellence

Additive Manufacturing

The new Center brings together hundreds of the world’s leading additive manufacturing experts in more than 150,000 square feet of cutting-edge innovation space – about the size of three football fields – to transform the way the world designs and manufactures.

NAMRI SME Puts the Spotlight on Industry Researchers at 45th Annual North American Manufacturing Research Conference

Additive Manufacturing

NAMRC is the premier international forum for applied research and industrial applications in manufacturing and design. Rajiv Malhotra , PhD, Oregon State University, Corvallis, Oregon. By SME.

Getting Real and Opening Doors: 3D Printing and Hands-On Experience at Grants Pass High School


David Brannen is the Woodshop and Manufacturing teacher at Grants Pass High School , in Grants Pass, Oregon. Student Innovations “The best prints are the outcome of students recognizing a problem, designing a solution, printing it, and starting the process all over again.

3D Printing Completes the Process for Professional Engineer


He currently works with small and start-up companies as a consulting engineer, designing products for performance and manufacture. With over 30 years of manufacturing products under his belt, Patrick Logan is no newcomer to functional 3D design, or even the concept of 3D printing.

Upcoming CATI Training Classes for August 2016 – Featuring SOLIDWORKS Drawings

CATI Tech Notes

In total, there are over 50 training classes to choose from including classes in Design, Simulation, Data Management, Design Automation, 3D Printing and more.

Community Spotlight: Tracked Mobility

The Solidworks Blog

Jeter says he felt a lot of pressure to win after that event, which led him to Eugene, Oregon, to train with legendary Paralympian Craig Blanchette, who was featured in a famous Nike TV commercial that showed him getting up in the morning, swimming, and lifting weights.

Upcoming CATI Training Classes for May 2016

CATI Tech Notes

With our recent merger with MCAD, we have 5 additional training centers in Colorado, New Mexico, Washington and Oregon. We want you to understand how each function operates so you can figure out how that best applies to the products you need to design. Design Tables and Equations.

The Future Of Manufacturing As Told In Four Objects

Design 2 Part News

Swapping new materials for old ones is interesting, but there are so many new designs to explore when you design by computer or biology,” says Brooklyn architect David Benjamin, whose firm, The Living, designed the gravity-defying 41-foot tower shown above.