SME’s AeroDef Manufacturing 2020 to Take on Rapid Growth, Advanced Manufacturing, Cybersecurity Topics in Fort Worth on March 16-19

Additive Manufacturing

To grow from the current 20,000 aircraft to 40,000, a tremendous amount of throughput must occur, forcing our industry to embrace higher-volume advanced processes and materials, including more use of automation.

Look Who You’ll Meet at AeroDef!

Additive Manufacturing

SME ’s AeroDef Manufacturing event will bring together the leading companies and executives from aerospace and defense manufacturing to explore current technologies and coming trends March 6 to 9 at the Fort Worth Convention Center. Fort Worth [TX] Convention Center.

Exclusive with Maria Conrado of SME about RAPID + TCT 2018

Additive Manufacturing

Fort Worth Convention Center. Fort Worth, Texas USA. With RAPID + TCT 2018 just around the corner, what factors led to the decision to hold the event in the Dallas-Fort Worth (DFW) region? What’s the best machine, material and process for a particular part?

America Makes to Exhibit at RAPID + TCT 2018

Additive Manufacturing

America Makes proudly announces its participation and exhibition at North America’s preeminent event for discovery, innovation, and networking in 3D manufacturing, RAPID + TCT 2018 , to be held next week, April 23-26 , 2018 , at Fort Worth Convention Center , Fort Worth , Texas.

RAPID+TCT 2018 in Review: Industry innovation in materials and processes

3D Printing Industry

This year’s event in Fort Worth, Texas showcased more than 300 exhibitors and 150 technical talks to thousands of attendees. The 2018 RAPID+TCT Conference has come and gone as another strong demonstration of the growth present in the 3D printing industry. With industry-wide growth estimated between 21% and 25% annually, the $10 billion dollar mark […].

Important Events in AM

Wohlers Talk

The surface finish of the printed lenses is <2 nm RMS (less than 2 billionths of a meter), so no post-processing is required. mm in height, so the process is relatively fast.

Thermo Scientific Explorer 4 Additive Scanning Electron Microscope Delivers First Dedicated Solution for 3D Printing Process Control

Additive Manufacturing

The new Explorer 4 Additive solution will be demonstrated at Rapid + TCT 2018 (booth 625) in Fort Worth, Texas, April 24-26, 2018. High-resolution imaging and elemental analysis permit fast, accurate characterization of powdered raw materials and inspection of finished parts.

DSM Showcases Expanded 3D Printing Portfolio and Partnerships at RAPID+TCT 2018

Additive Manufacturing

24 April 2018 – Royal DSM , a global science-based company active in health, nutrition and materials, will be demonstrating its expanded portfolio of 3D printing materials, for SLA and FFF, at RAPID+TCT 2018 this week in Fort Worth.

3 Things You Shouldn’t Miss at AeroDef Manufacturing 2017

Additive Manufacturing

FORT WORTH, Texas, Jan. 26, 2017 – SME ’s AeroDef Manufacturing event takes place March 6 to 9 at the Fort Worth Convention Center. Triumph Aerospace, Concept Laser and the Lockheed Martin Aeronautics Fort Worth facility — which produces F-16 and F-35 aircraft for U.S.

ITEAM Platform Launched to Evaluate Feasibility of Additively Manufacturing Parts

Additive Manufacturing

FORT WORTH, Texas, April 25, 2018) — SME , working with the Florida Institute of Technology ’s Michael Grieves , PhD , and other industry partners, has announced the beta launch of the Independent Technical Evaluation of Additive Manufacturing Consortium ( ITEAM ) evaluation platform.

Experts in Demand: Growth in Metal Additive Manufacturing Creates Need for Professionals

Additive Manufacturing

FORT WORTH, Texas, April 26, 2018) – SME today announced the release of a new report, “ Experts in Demand: Growth in Metal Additive Manufacturing (AM) Creates Need for Professionals ” at SME’s RAPID + TCT event in Fort Worth.

SME Releases Medical Additive Manufacturing 2018 Annual Report

Additive Manufacturing

25, 2018) – SME today announced the release of the Medical AM3DP 2018 Annual Report at SME’s RAPID + TCT event in Fort Worth. Industry Collaboration Leads to Extraordinary Strides in Growth. DEARBORN, Mich.,

SME and Rapid News Publications Ltd Expand Partnership to Further Serve Industry

Additive Manufacturing

Learn more at this year’s RAPID + TCT taking place April 23-26 at the Fort Worth Convention Center in Fort Worth , Texas. The TCT Group mission is to accelerate the adoption of technologies that power innovation in the design-to-manufacturing process chain.

Linde Tackles Additive Manufacturing Quality

Additive Manufacturing

March 28,2018 – Linde LLC will showcase three new technologies to improve the quality of metal additive manufacturing ( AM ) at RAPID+TCT 2018 in Fort Worth , Texas , April 24-26 , booth #1347. The portable unit is ideal for powder-bed laser fusion processes.

SME’s 2018 Digital Manufacturing Challenge Seeks Student Designs

Additive Manufacturing

Using an additive manufacturing process known as direct digital manufacturing (DDM), previous winners have created many notable designs, including customized golf grips, drones for bridges, prosthetic legs for dogs, handgrips, rechargeable remotes and surgical knee braces. (DEARBORN, Mich.,

NVision Scans Rare Prehistoric Fossils for Texas Museum

Additive Manufacturing

LuJan, who had used 3D scanning and printing before, chose to use the same process for the Dimetrodon skeleton as well as several other Permian skulls/skeletons from Texas. “I LuJan reached out to several scanning services in the Dallas/Fort Worth area but was disappointed by their response.

Texas 78

RAPID + TCT 2018: Collaborating to Advance Medical Additive Manufacturing

Additive Manufacturing

FORT WORTH, Texas, March 1, 2018 — Collaboration between device manufacturers, clinicians, technology developers and researchers in additive manufacturing will be on full display at the Fort Worth Convention Center during SME ’s RAPID + TCT event, April 23-26.

Additive Manufacturing Innovations On Display At RAPID 2018

Stratasys Blog for a 3D World

No matter where you are at on your AM journey, there is something at this year’s show in Fort Worth, TX that will be sure to delight you. Be one of the first to see our newly unveiled manufacturing solutions and experience a manufacturing workflow from idea to production, that brings to life how additive manufacturing impacts the full process.

EOS to Launch New EOS P 810 Polymer Industrial 3D Printing Platform and HT-23 Material at RAPID + TCT 2018

Additive Manufacturing

24 April, 2018 – EOS , the world’s leading technology provider in the field of industrial 3D printing of metals and polymers, is showcasing its latest portfolio of industrial additive manufacturing (AM) solutions at RAPID + TCT 2018 in booth #1118 , hosted in Fort Worth , Texas , April 23-26.

EOS 61

LPW’s Upgraded AM Metal Powder Capabilities on Display at Rapid +TCT

Additive Manufacturing

LPW , a leading manufacturer of high quality metal powders and innovative solutions for AM production, is showcasing the ability of its materials to drive improved performance in the AM process at Rapid+TCT in Fort Worth, TX.

Strong Customer Demand Verifies XJet’s Move from R&D to a Major Player in Additive Manufacturing

Additive Manufacturing

Preferring additive manufacturing processes for reduced timescales and more creative freedom, XJet was the only technology that could fully meet the requirement according to Syqe Medical Founder and CEO, Perry Davidson. Unique patented NPJ technology set to transform how products are made.

XJet Kick-Starts 2018 with Attendance at Three Industry Tradeshows and a Conference in Europe and North America

Additive Manufacturing

Parts are created with superfine details, smooth surfaces and high accuracy due to the unique printing process. RAPID+TCT, Fort Worth, Texas – 24-26 April 2018. Participation cements XJet’s position in the AM market and expanding into technical ceramics. .

Stratasys Reveals Development of New Metal Additive Manufacturing Platform for Short-Run Manufacturing Applications

Additive Manufacturing

The Company will unveil further details about this new technology at the RAPID + TCT 3D Printing and Additive Manufacturing Conference , Booth #1104 , taking place from April 23-26 in Fort Worth, Texas.

RAPID + TCT – Celebrating 30 Years at the Forefront of Additive Manufacturing and 3D Printing Technologies

Additive Manufacturing

RAPID + TCT guests of all experience levels are welcome to interact with lab staff and observe the processes up close and in person. Completing these programs will help you gain a better grasp on the principles and processes of additive manufacturing.